NO CRANK @ P Mode

milkboy · Post by **milkboy** » Mon Nov 08, 2010 2:19 am

Hi fellow bros or sis,

My 06 Civic FD1, 70,000km milage encounter this ignition crank problem. In this 1 year from the occasionally HOLD at Crank position for 5sec it will start to kick in. This couple of days totally dead. After overnite go back to shopping mall to try again still not working. No choice calling for tow car. While waiting for the Tow car. I get to the car to get ready for them to tow before they arrive, from P i shift to N=NEUTRAL gear, my hand itchy try go and Crank and it START the engine instantly. And these 2 days it happen NO CRANK but shift to N, turn the key and it start CRANK n Engine start.

Any bros happen like these before or able to feedback on these? i seen most topic ABLE TO CRANK but cannot start the engine.

chayfoocheong · Post by **chayfoocheong** » Tue Nov 09, 2010 9:01 pm

I experienced your problem in my previous ride.
From technical point of view, your starter motor is not engaged to your engine during cranking. Probably, the engage solenoid is faulty at P position. Get it check and replace.,

milkboy · Post by **milkboy** » Tue Nov 09, 2010 11:18 pm

thanks bro, how u did d check? u go to which workshop? can recommend?how much damage for tht?thanks

chayfoocheong · Post by **chayfoocheong** » Wed Nov 10, 2010 8:43 am

I am sorry. I did not get it replace when I sold my ride.
I don think it will cost too much as the dealer don bother either. Check with Thian Seng 63371795

milkboy · Post by **milkboy** » Wed Nov 10, 2010 12:56 pm

thanks bro for info.appreciate tht...

Goobii · Post by **Goobii** » Sun Nov 28, 2010 11:31 pm

Ur alarm system could be causing the problem ... I am having such problem before using Zenesis Alarm - ZN 502

Read my review here...
http://www.sgstream.org/forum/threads/2 ... ther-forum.

Changed to Viper 5902 , all the problem solved.

I had another forumer complaining that he cannot start too and worse... need to go SUPER near then can remote start.. so fark tub meh... need to see car then can remote start.. WTH...

anyway U check ur alarm and see how..

milkboy · Post by **milkboy** » Mon Nov 29, 2010 11:56 am

hmmm... i do suspect wth my aftermarket alarm, but already 1 yr no issue only recent. but nw nothing happen. is yr fren using remote engine start cos f problem or purely alarm?

eeee78 · Post by **eeee78** » Thu Dec 02, 2010 9:13 am

Nothing to do with Alarm
Its a faulty sensor/component, I got mine replaced at Kah Motor since my car is still under warranty.
Same case as you, cant crank at P, shift to N, no problem cranking.

Went back to Kah Motor and they replace a sensor/component and problem solved.

milkboy · Post by **milkboy** » Thu Dec 02, 2010 11:40 am

Thanks, bro.. wht sensor & component change any description? as mine is not from KM not able to go there for service.

eeee78 · Post by **eeee78** » Fri Dec 03, 2010 11:25 pm

milkboy wrote:Thanks, bro.. wht sensor & component change any description? as mine is not from KM not able to go there for service.

Sorry bro, I also not sure.

milkboy · Post by **milkboy** » Sat Dec 04, 2010 1:00 am

ah... Thanks bro, is alright. I will try to let the PI mechanic know and from there he may know what happen or which to change.thanks brother