Need technical advice ?
-
hot-rod
- 2000rpm
- Posts: 20
- Joined: Tue Dec 08, 2009 11:19 pm
Post
by hot-rod » Sun Apr 18, 2010 7:50 am
hi.. i got tis issue went it raining heavy my car always kena check light on.. anyone can advice?
dream on
-
shellshox
- 3000rpm
- Posts: 57
- Joined: Wed Oct 28, 2009 1:42 pm
Post
by shellshox » Sun Apr 18, 2010 6:09 pm
Mine is on constantly, went to check but mech say the car mod so much till the chips cannot detect properly thus the light always on.... but so far i drive no problem...
-
hot-rod
- 2000rpm
- Posts: 20
- Joined: Tue Dec 08, 2009 11:19 pm
Post
by hot-rod » Sun Apr 18, 2010 6:55 pm
but mine went light is on..there no vtec..hw to drive..heheh
dream on
-
chayfoocheong
- 4000rpm
- Posts: 132
- Joined: Tue Nov 17, 2009 1:23 pm
- Location: Singapore
Post
by chayfoocheong » Mon Apr 19, 2010 12:10 pm
Engine light indicator "On" only can be reset by KAH. The feature only KAH can reset by the program. Other workshop will not be able to do so easily.
Go back to KAH for once... to rectify.
-
saint jo
- 9000rpm Rev Cut
- Posts: 4044
- Joined: Mon Sep 10, 2007 2:22 pm
- Location: Turbo
Post
by saint jo » Mon Apr 19, 2010 4:29 pm
one of ur sensor gana water la...
hence gg a error code..
check ur error code to know which sensor got problem and repair it...
the more popular workshops will have the dynostic tools to check the error code..
Turbo...
sTocK iS beST....
世界上ä¸
-
hot-rod
- 2000rpm
- Posts: 20
- Joined: Tue Dec 08, 2009 11:19 pm
Post
by hot-rod » Mon Apr 19, 2010 6:59 pm
oh..thanx 4 the advice..can tell me any good workshop
dream on
-
hot-rod
- 2000rpm
- Posts: 20
- Joined: Tue Dec 08, 2009 11:19 pm
Post
by hot-rod » Mon Apr 19, 2010 9:33 pm
hi bro.. i got code 22..vtec pressure valve, wat that?
dream on
-
Gresini
- 8000rpm Red Line
- Posts: 1673
- Joined: Sun Aug 13, 2006 11:13 am
- Location: Geylang
-
Contact:
Post
by Gresini » Tue Apr 20, 2010 1:31 am
-
redeye
- 5000rpm
- Posts: 160
- Joined: Sat Aug 02, 2008 3:35 pm
Post
by redeye » Tue Apr 20, 2010 8:51 pm
borrow a good condition ecu and try don't spend too much time and money going to workshop .Most of the time is ECU spolit
-
superkoh
- 7000rpm VTEC ON
- Posts: 917
- Joined: Tue May 19, 2009 9:06 pm
Post
by superkoh » Tue Apr 20, 2010 9:12 pm
shellshox wrote:Mine is on constantly, went to check but mech say the car mod so much till the chips cannot detect properly thus the light always on.... but so far i drive no problem...
cannot be lah. lol
use the diagnose tool to do a error trial
-
hot-rod
- 2000rpm
- Posts: 20
- Joined: Tue Dec 08, 2009 11:19 pm
Post
by hot-rod » Tue Apr 20, 2010 11:26 pm
thanx 4 the advice..
dream on
-
lfwd15
- 8000rpm Red Line
- Posts: 1342
- Joined: Fri Oct 07, 2005 10:58 pm
- Location: next to Pinevale
Post
by lfwd15 » Wed May 05, 2010 7:51 am
u can try get an obd to remove the error code.
Learning is a journey. There's never an end to it.
-
daboy14
- 4000rpm
- Posts: 128
- Joined: Mon Jan 18, 2010 1:45 am
- Location: Singapore
-
Contact:
Post
by daboy14 » Wed May 05, 2010 10:28 am
Code 22??
Just check ur vtec solenoid valve located right beside
the distributor clean it maybe theres a corrosion on the
terminals thats y CEL light appears
"LIFE begins at 8.9k rpm.... VTEC power!!!
