hi guys im gonna buy a white LED strip off the rack and install it on my own..
im not too familiar with wirings.. anyone can help me out? ..
do i just splice the wires and twine them together and tape it up?
rear licence plate LED light strip
-
Alvinyzw
- 10 000rpm Over Rev
- Posts: 9136
- Joined: Sat Oct 25, 2008 6:27 pm
- Location: SengKang/Macpherson
- Contact:
Re: rear licence plate LED light strip
Most important thing is the right connection bro.airborne wrote:hi guys im gonna buy a white LED strip off the rack and install it on my own..
im not too familiar with wirings.. anyone can help me out? ..
do i just splice the wires and twine them together and tape it up?
Dun make no. plate brighter for LTA to see leh 
Anyway, you can probably tap it off the original wiring to your license plate bulbs.
Can splice and connect or use a splice tap/wire tap.
You might also want to check the fuse rating for this area, although I don't think the LEDs will add too much load.
Alternatively, change our your original 2 xenon license plate bulbs to good quality LEDs, and you'll have nice, white illumination without being overbright and also avoid looking like Xmas tree lighting.
Anyway, you can probably tap it off the original wiring to your license plate bulbs.
Can splice and connect or use a splice tap/wire tap.
You might also want to check the fuse rating for this area, although I don't think the LEDs will add too much load.
Alternatively, change our your original 2 xenon license plate bulbs to good quality LEDs, and you'll have nice, white illumination without being overbright and also avoid looking like Xmas tree lighting.