Unanswered topics Active topics

newbie here pls help BRO

Need technical advice ?
Post Reply
nokiatan
3000rpm
3000rpm
Posts: 62
Joined: Tue Sep 16, 2008 2:07 am

newbie here pls help BRO

Post by nokiatan » Tue Nov 10, 2009 3:49 am

Hi guys

just change my new tyres was told by the mechanic my low arms all spoile driving I found that the car keeps pulling to the left at high speed. Went to do wheel alignment but does not solve the problem. Further checks by the mechanic there revealed that the shock absorbers are less than ideal and the two circular thing at each real lateral arm is cracked. He suspected that the pulling to the left could be due to these instead. good low arms how much will it cost driving EK3 now

can anyone recommend to me reliable workshop specialising in Hondas (if there is such thing as a reliable workshop in the first place).


Appreciate if the guys here can give some advise to the newbie.

Thanks a lot :D :D :D

eeee78
SHC Die Hard!!!
SHC Die Hard!!!
Posts: 32773
Joined: Thu Nov 11, 2004 10:47 am
Location: Fortune Island

Post by eeee78 » Tue Nov 10, 2009 2:28 pm

Try Ah Heng!!!
Soon Kiang Motors (google this for contacts and address)
TCSS Emperor!
讲鸟è¯

User avatar
pgm iv
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 954
Joined: Mon Jun 27, 2005 11:36 pm
Location: island wide
Contact:

Post by pgm iv » Thu Nov 12, 2009 1:23 am

defu lane 10 blk 13...go in look for hand some heng...
Image

nokiatan
3000rpm
3000rpm
Posts: 62
Joined: Tue Sep 16, 2008 2:07 am

Post by nokiatan » Thu Nov 12, 2009 3:31 am

is ah heng good at repair honda civic EK3 for my case thanks every BRO help me he got do upper front arms and low arms right and is it very expensive how much do you guys know?????



:D :D :D

noobdriver
2000rpm
2000rpm
Posts: 20
Joined: Thu Sep 10, 2009 5:09 pm

Post by noobdriver » Thu Dec 03, 2009 9:52 am

he is good in all civics. From Civic EG to EK. everything also know.

Post Reply