Unanswered topics Active topics

Auto Car - N Gear

Need technical advice ?
nowhere
2000rpm
2000rpm
Posts: 23
Joined: Tue Jun 30, 2009 9:43 pm

Auto Car - N Gear

Post by nowhere » Sun Aug 09, 2009 4:53 pm

Hi all

What the use of the N-Gear? It stated in the manual it for short stopping (ie waiting period) but i'm sure most of us would use the P instated. So what use is it for?

In addition, if we are travelling on the highway going down slope. can we engage N to make use of the free gear, it would save petrol as there no crutch brake right?

Would frequency changing between N and D cause any long term effect?

cheers

rango
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 652
Joined: Tue Mar 08, 2005 3:05 pm

Post by rango » Sun Aug 09, 2009 9:16 pm

i drive auto seldom touch my n gear....sometimes just for short bwaiting period i engage n gear when i waiting otherwise nvr touch... :D

User avatar
City1972
8000rpm Red Line
8000rpm Red Line
Posts: 1530
Joined: Fri Mar 26, 2004 11:55 am

Post by City1972 » Mon Aug 10, 2009 12:07 am

i find going down slope without engaged in gear dangerous. car like floating n theres no engine brake in emergency.

User avatar
JackOfTradez
5000rpm
5000rpm
Posts: 289
Joined: Sun Jun 14, 2009 12:42 pm
Location: Singapore

Post by JackOfTradez » Mon Aug 10, 2009 1:31 am

City1972 wrote:i find going down slope without engaged in gear dangerous. car like floating n theres no engine brake in emergency.
true...but auto car when in D doesnt have much engine brake rite?coz its always moving forward

nowhere
2000rpm
2000rpm
Posts: 23
Joined: Tue Jun 30, 2009 9:43 pm

Post by nowhere » Mon Aug 10, 2009 10:32 am

City1972 wrote:i find going down slope without engaged in gear dangerous. car like floating n theres no engine brake in emergency.
Yup fully agreed when going down slope without engaged in gear, however, i'm referring to highway where there downward slope. I mean it a straight road and you are crusing, with gear engaged, it tend to slow you down (Safety factor i think). So was thinking if i enaged to N, it should be more fuel saving for me. But wonder what the long term impact of switching between D and N frequency. Most ppl dont use N gear

User avatar
Silver
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4788
Joined: Sun Feb 22, 2004 5:08 pm
Location: 10-pi-nee

Post by Silver » Mon Aug 10, 2009 3:42 pm

nowhere wrote:
City1972 wrote:i find going down slope without engaged in gear dangerous. car like floating n theres no engine brake in emergency.
Yup fully agreed when going down slope without engaged in gear, however, i'm referring to highway where there downward slope. I mean it a straight road and you are crusing, with gear engaged, it tend to slow you down (Safety factor i think). So was thinking if i enaged to N, it should be more fuel saving for me. But wonder what the long term impact of switching between D and N frequency. Most ppl dont use N gear
Switching them too often might hurt your gearbox in the long run... :) :)
Image

There's always a better 2molo...........

calvin_
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 646
Joined: Fri Nov 07, 2008 6:22 pm

Post by calvin_ » Mon Aug 10, 2009 5:35 pm

as far as i know, it is for the following reasons:
1) Provides a buffer between D and R.
2) Meant for short waiting when you do not wish to engage the tranmission lock (P). (some cars, very rare though, cannot wait in Neutral)
3) Meant for freewheeling. By this i mean like when you want to jack up a car to tyre change, or check. or towing, you want to handpush your car without starting the engine.

In modern fuel injected engines, by putting to N to freewheel the car, doesn't save fuel. even if it does, it's insignificant. according to some sources, it wastes fuel. but like i say, insignificant.
Treat a car like a human. It needs healthy diet, care and grooming, and most importantly, exercise.

User avatar
Nov
4000rpm
4000rpm
Posts: 81
Joined: Mon Feb 26, 2007 10:17 pm

Post by Nov » Mon Aug 10, 2009 8:32 pm

I put to neutral when I approach a traffic junction that just turned red...Cos the clutch is at half-clutch when its at D and the car isn't moving...So being at half-clutch wears the clutch pads and for prolonged periods isn't too healthy haha...

Do correct me if I'm wrong though...
- Nov -
09 Miku RB3 ODC
Slow and not so steady...

User avatar
VBlaster_W211
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 584
Joined: Tue Apr 05, 2005 2:50 pm

Post by VBlaster_W211 » Mon Aug 10, 2009 10:23 pm

Wrong. Constantly switching bet D and N is what will wear the auto transmission.

There is no "half-clutch" for auto gear when not moving in D.

User avatar
Nov
4000rpm
4000rpm
Posts: 81
Joined: Mon Feb 26, 2007 10:17 pm

Post by Nov » Tue Aug 11, 2009 12:15 am

VBlaster_W211 wrote:Wrong. Constantly switching bet D and N is what will wear the auto transmission.

There is no "half-clutch" for auto gear when not moving in D.
Oh ok, thanks for correcting me...

Since there are disadvantages in switching, anyone knows the reason why do some people recommend that we switch to neutral when we are going to stop for more than a minute?
- Nov -
09 Miku RB3 ODC
Slow and not so steady...

User avatar
intotead
4000rpm
4000rpm
Posts: 98
Joined: Tue Oct 02, 2007 12:06 am

Post by intotead » Wed Aug 12, 2009 8:37 am

never put to N when yr car is still moving. this is my workshop guys told me. u will spoilt your gearbox for sure if put to N when car still moving. if stop already put to N a while still ok but better not. as some guys here also say will wear your gearbox faster.
JAZZ UP YOUR LIFE WITH JAZZ

ggeeulb
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 357
Joined: Wed Dec 10, 2008 3:37 pm

Post by ggeeulb » Wed Aug 12, 2009 9:04 am

Aiyo. So many theories. :lol: I think the biggest benefactors are the car manufacturers. Cos they purposely put in the N and don't put in a safety feature (like brake before engage Reverse and L gear) so that everyone can suka suka push into N, then gearbox spoil, they can sell you new one. Hahahahahaha. Seriously you guys. Give it up.

nowhere
2000rpm
2000rpm
Posts: 23
Joined: Tue Jun 30, 2009 9:43 pm

Post by nowhere » Wed Aug 12, 2009 8:47 pm

intotead wrote:never put to N when yr car is still moving. this is my workshop guys told me. u will spoilt your gearbox for sure if put to N when car still moving. if stop already put to N a while still ok but better not. as some guys here also say will wear your gearbox faster.
So put or no put. In nut shell, N is useless ahhh

Cougar_23
5000rpm
5000rpm
Posts: 247
Joined: Sun Jul 01, 2007 6:36 pm

Post by Cougar_23 » Thu Aug 13, 2009 6:35 am

it is ok to put N during ocassional stops

but compared to one who stepped on the brake during a stop instead, the latter's gearbox will last longer.

if i remember correctly during an advanced driving course many yrs ago, "half clutch" happens when a driver depresses the brake pedal a little, at this moment u can feel your car wanting to inch forward

to answer your question, N gear is useful because the gear/clutch will have "sufficient time" to react & engage between D, R, D1 or D2 modes

no manufacturers can do up auto transmission gearbox without having the N gear.

User avatar
intotead
4000rpm
4000rpm
Posts: 98
Joined: Tue Oct 02, 2007 12:06 am

Post by intotead » Thu Aug 13, 2009 10:11 am

nowhere wrote:
intotead wrote:never put to N when yr car is still moving. this is my workshop guys told me. u will spoilt your gearbox for sure if put to N when car still moving. if stop already put to N a while still ok but better not. as some guys here also say will wear your gearbox faster.
So put or no put. In nut shell, N is useless ahhh
better not lah. just my 2 cents. by the way singapore traffic red light very fast what put to N than a while must put back to D. sure very fast up the lorry one. as for me i very seldom put to N unless the traffic very bad and does not move at all i will normally put to P better, like that no need to press the brakes what right..... hope it helps..
JAZZ UP YOUR LIFE WITH JAZZ

Post Reply