Unanswered topics Active topics

17, 18 or 19 inch ?

Honda's latest 8th generation Accord
fishyfish
5000rpm
5000rpm
Posts: 287
Joined: Sat Jul 26, 2008 8:02 pm

17, 18 or 19 inch ?

Post by fishyfish » Sun May 17, 2009 8:33 am

hi all, would like to start a discussion over the new accord JDM 2.4 i-vtec model. i believe the stock come with 225/50R17 and 235/45R18. how abt 19? issit to heavy feel free to comment thx

A_L
2000rpm
2000rpm
Posts: 28
Joined: Sat Jun 07, 2008 11:37 pm

Re: 17, 18 or 19 inch ?

Post by A_L » Sun May 17, 2009 3:00 pm

fishyfish wrote:hi all, would like to start a discussion over the new accord JDM 2.4 i-vtec model. i believe the stock come with 225/50R17 and 235/45R18. how abt 19? issit to heavy feel free to comment thx
Hi fishyfish,

I'm on the CP2, originally on 225/50/17 and just changed to 225/40/19. Initially wasn't sure to upsize to 19" as most bros changed to 18". There were opinions like too heavy, too draggy, too noisy, less comfort, higher FC etc.

I could have changed to a wider tyre with lower profile but there will be trade off. I'm not the expert in this area but my feel after changing to 19" is the ride is much more stable in high speed driving and conering and less roll. The response to steering is also sharper. As to being draggy and heavy on the steering, not at all. Moving off from standstill and stepping on the gas when cruising, I felt was lighter and more responsive. Probably because of the weight of the rim and tyre which was lighter than the original.

In the noise and comfort department, there was slightly more noise and I can feel the bumps and thunps over uneven road surface but I can still live with it. Can't comment on the FC (I'm not bothered) yet but in my opinion, all the above are also dependent on the brand of tyres as well. Last but not least, I think the trade off for noise and comfort will be better handling (to me that is safety) and aesthetics (looks like a different car altogether...ha..ha..). Any comments from bros on 18"?

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Sun May 17, 2009 8:08 pm

Bro,mind share ur ride pic ma??I also on CP2 VIP with 19"work rim also,with F8.5J 235/35 R9.5J 245/35.I think ur choose wrong tyre.too thick..that why too heavy.u suit try 234/35.yes 19"rim can feel heavy when pick up,but cornering really stable coz rear rim offset wider.feeling nice!!If noise sound frm tyre.For my opinion,mayb u suite try michelle or hangkok tyre.low sound profile.Now i using TOYO T1R.feel noisy bitloh..haha..if got budget,go for Tein SS or air sus.lol..make u ride more lower.will look very nice and fierce!!VIP!!!peccsss..[/b].. :twisted: :twisted: :twisted: :twisted: :twisted:

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Sun May 17, 2009 8:15 pm

bro,for me suite go for 20"""""really chun chun!!SG all highway.... :) :) :idea: :idea:

A_L
2000rpm
2000rpm
Posts: 28
Joined: Sat Jun 07, 2008 11:37 pm

Post by A_L » Sun May 17, 2009 8:47 pm

ngiing wrote:Bro,mind share ur ride pic ma??I also on CP2 VIP with 19"work rim also,with F8.5J 235/35 R9.5J 245/35.I think ur choose wrong tyre.too thick..that why too heavy.u suit try 234/35.yes 19"rim can feel heavy when pick up,but cornering really stable coz rear rim offset wider.feeling nice!!If noise sound frm tyre.For my opinion,mayb u suite try michelle or hangkok tyre.low sound profile.Now i using TOYO T1R.feel noisy bitloh..haha..if got budget,go for Tein SS or air sus.lol..make u ride more lower.will look very nice and fierce!!VIP!!!peccsss..[/b].. :twisted: :twisted: :twisted: :twisted: :twisted:
Bro ngiing, paiseh, don't know how to upload pic. My tyre size is correct. My rim is 8J and I'm trying to maintain the same diameter as my original tyre. Also I don't want to go for a lower profile cos I know comfort will be sacrified. I think your front tyre is undersized.

I mentioned that it was not heavy at all, in fact I felt that it was abit lighter. I think whatever tyre we use it is still going to be abit noisier than the original profile and my ride was only abit noisier from my original, which is bearable for me. I'm on Yoko Advan Sport by the way.

Did you lower your ride? Mind to show us your pic?Maybe we should call for a meetup to share, I know there are some bros who also want to change their rims.

weaver87
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 627
Joined: Mon Sep 08, 2008 12:12 am
Location: Where u find rides....

Post by weaver87 » Sun May 17, 2009 10:52 pm

A_L wrote:
ngiing wrote:Bro,mind share ur ride pic ma??I also on CP2 VIP with 19"work rim also,with F8.5J 235/35 R9.5J 245/35.I think ur choose wrong tyre.too thick..that why too heavy.u suit try 234/35.yes 19"rim can feel heavy when pick up,but cornering really stable coz rear rim offset wider.feeling nice!!If noise sound frm tyre.For my opinion,mayb u suite try michelle or hangkok tyre.low sound profile.Now i using TOYO T1R.feel noisy bitloh..haha..if got budget,go for Tein SS or air sus.lol..make u ride more lower.will look very nice and fierce!!VIP!!!peccsss..[/b].. :twisted: :twisted: :twisted: :twisted: :twisted:
Bro ngiing, paiseh, don't know how to upload pic. My tyre size is correct. My rim is 8J and I'm trying to maintain the same diameter as my original tyre. Also I don't want to go for a lower profile cos I know comfort will be sacrified. I think your front tyre is undersized.

I mentioned that it was not heavy at all, in fact I felt that it was abit lighter. I think whatever tyre we use it is still going to be abit noisier than the original profile and my ride was only abit noisier from my original, which is bearable for me. I'm on Yoko Advan Sport by the way.

Did you lower your ride? Mind to show us your pic?Maybe we should call for a meetup to share, I know there are some bros who also want to change their rims.
Bro ngiing,

Thot u were on 20" ? how cum become 19"? :?

yr front 235/35/R19 is havin smaller OD than original 225/50/R17...use any tyre conversion chart or web site program n u will realise...however, as long as u r comfortable...its yr choice! Just need to take note yr speedo meter does not reflect yr actual speed anymore....

Havin wider tyre behind is more stable during cornering....for sure but the OD is different from the front...IMO, u should do a speedo meter re-calibration....

Noise will always be present especially after u worn out the tyre...but road condition matters alot!! So, we need to compare wisely....i think yr town's road condition has improved a lot,rite? :lol: :lol: :lol:

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Mon May 18, 2009 11:16 am

yalo..me on 19"now...look big coz the deep lip ma.wanna upgrade 20" soon...haha..i know SG got rules for tyre and speed meter reading.but msia don have.lol..we can choosing tyre looking more nice and more viploh..even got ppl use 30 tyre....but hard driving..like horse...lol..bumpy.. :)

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Mon May 18, 2009 11:18 am

A_L wrote:
ngiing wrote:Bro,mind share ur ride pic ma??I also on CP2 VIP with 19"work rim also,with F8.5J 235/35 R9.5J 245/35.I think ur choose wrong tyre.too thick..that why too heavy.u suit try 234/35.yes 19"rim can feel heavy when pick up,but cornering really stable coz rear rim offset wider.feeling nice!!If noise sound frm tyre.For my opinion,mayb u suite try michelle or hangkok tyre.low sound profile.Now i using TOYO T1R.feel noisy bitloh..haha..if got budget,go for Tein SS or air sus.lol..make u ride more lower.will look very nice and fierce!!VIP!!!peccsss..[/b].. :twisted: :twisted: :twisted: :twisted: :twisted:
Bro ngiing, paiseh, don't know how to upload pic. My tyre size is correct. My rim is 8J and I'm trying to maintain the same diameter as my original tyre. Also I don't want to go for a lower profile cos I know comfort will be sacrified. I think your front tyre is undersized.

I mentioned that it was not heavy at all, in fact I felt that it was abit lighter. I think whatever tyre we use it is still going to be abit noisier than the original profile and my ride was only abit noisier from my original, which is bearable for me. I'm on Yoko Advan Sport by the way.

Did you lower your ride? Mind to show us your pic?Maybe we should call for a meetup to share, I know there are some bros who also want to change their rims.
aha..bro,u sent u pic for me..i help u upload..fast2..share.. :idea: :idea:

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Mon May 18, 2009 11:33 am

haha..taikor jodge..look at dis accord..u think nice???20""

Image

TEIN SS for CP2
Image
Image
Image 8) 8) 8)

[VIP]
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 398
Joined: Fri Sep 03, 2004 6:47 pm
Location: Singapore

Post by [VIP] » Mon May 18, 2009 2:17 pm

ngiing wrote:yalo..me on 19"now...look big coz the deep lip ma.wanna upgrade 20" soon...haha..i know SG got rules for tyre and speed meter reading.but msia don have.lol..we can choosing tyre looking more nice and more viploh..even got ppl use 30 tyre....but hard driving..like horse...lol..bumpy.. :)
19" only? 20 lah. :P

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Mon May 18, 2009 7:57 pm

haha..19"can choose deep lip,20"cant liaw... :oops: :oops:
Last edited by ngiing on Mon May 18, 2009 8:03 pm, edited 1 time in total.

User avatar
ngiing
4000rpm
4000rpm
Posts: 152
Joined: Sun Mar 23, 2008 10:37 pm
Location: VIP WORLD

Post by ngiing » Mon May 18, 2009 7:59 pm

[b]"There's no such thing as being too low." If it doesn't scrape, you're not low enough. And if it doesn't rub, they're not wide enough. No VIP is truly VIP until it's been bagged. When it comes to wheels, VIP is not all about the largest diameter wheels you can fit. You don't need 22s or 24s; it's all about how wide your rim is. Stretch the tires, pull, flare, or shave the fenders, do whatever you have to, to fit the widest rims you can. Now thats VIP..
:idea: :idea: :idea:
Last edited by ngiing on Tue May 19, 2009 5:25 pm, edited 1 time in total.

weaver87
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 627
Joined: Mon Sep 08, 2008 12:12 am
Location: Where u find rides....

Post by weaver87 » Tue May 19, 2009 11:57 am

:clap: :clap: :clap: :clap:

User avatar
MrMurderman
10 000rpm Over Rev
10 000rpm Over Rev
Posts: 6739
Joined: Wed Nov 21, 2007 4:00 pm
Location: Singapore (CCK)

Post by MrMurderman » Tue May 19, 2009 1:35 pm

stick 1 "VIP" sticker and people will know ur car is VIP lor... :wink:

jus jking... :lol:
殺很大!ï¼

[VIP]
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 398
Joined: Fri Sep 03, 2004 6:47 pm
Location: Singapore

Post by [VIP] » Tue May 19, 2009 3:21 pm

ngiing wrote:haha..19"can choose deep lip,20"cant liaw... :oops: :oops:
so whats ur width now? how deep is ur lip? show pic lah. :P

Post Reply