Generation-8 KM Accord-CP

hhong · Post by **hhong** » Thu Oct 30, 2008 11:02 am

Robert wrote:
hhong wrote:
Robert wrote: Which PPS have you decided on?
hi robert,

most likely to be CSII =)
Can you advise why you chose CS-II? I also want to know so that when my contract ends, may change.

firstly, price. it is one of the most affordable PPS solution in the market. after discount for new cars or MCF discount etc, it costed me $280.

second, i went down to see on first hand account on their claim of the PPS. overall, i feel that it is good enough for me. i saw one white golf and a black civic. it is the black civic that caught my attention. you guys will prolly know how difficult it is for black cars to shine...well, they did it and i am impressed.

lastly, i wanted to know if it is really true that there are more xmm over there...hahaha...joking

anyway, the above 2 pointers are good enough reason for me to go over. location-wise, it is rather close to where i am working now.

Robert · Post by **Robert** » Thu Oct 30, 2008 11:35 am

hhong wrote:firstly, price. it is one of the most affordable PPS solution in the market. after discount for new cars or MCF discount etc, it costed me $280.

second, i went down to see on first hand account on their claim of the PPS. overall, i feel that it is good enough for me. i saw one white golf and a black civic. it is the black civic that caught my attention. you guys will prolly know how difficult it is for black cars to shine...well, they did it and i am impressed.

lastly, i wanted to know if it is really true that there are more xmm over there...hahaha...joking anyway, the above 2 pointers are good enough reason for me to go over. location-wise, it is rather close to where i am working now.

I know the thrill of a shiny black car - my previous CM5 was black and when it was groomed, it looked like a killer!

http://www.mycarforum.com/forum/General ... )_P365948/

Robert · Post by **Robert** » Thu Oct 30, 2008 11:50 am

weaver87 wrote:Robert,

Grooming looks good! Pls advise what is the damage? May be try them in my next PPS.

Thks!

Don't remember - but you can negotiate from the prices here.

http://www.groomwerkz.com/rates.html

stingray751 · Post by **stingray751** » Fri Oct 31, 2008 9:02 am

Hi All,
Just want to update on the rear booth light I did.
Managed to "tap" on the brake line. Changed the bulb holder to fit in brake light and park light.
Project done.

Robert · Post by **Robert** » Fri Oct 31, 2008 9:46 am

stingray751 wrote:Just want to update on the rear booth light I did.
Managed to "tap" on the brake line. Changed the bulb holder to fit in brake light and park light.Project done.

If you tap into the brake line, then the boot light will only come on when you press the brake? I don't understand.

stingray751 · Post by **stingray751** » Fri Oct 31, 2008 10:53 am

Robert wrote:If you tap into the brake line, then the boot light will only come on when you press the brake? I don't understand.

Hi Robert,
My terms used may be wrong.
The light I am mentioning is not the internal booth light but the fake light on the booth exterior of our CPs.

Robert · Post by **Robert** » Fri Oct 31, 2008 11:38 am

stingray751 wrote:
Robert wrote:If you tap into the brake line, then the boot light will only come on when you press the brake? I don't understand.
Hi Robert,
My terms used may be wrong.
The light I am mentioning is not the internal booth light but the fake light on the booth exterior of our CPs.

You mean on the piece of red plastic on the boot? Nice! Got pics?

stingray751 · Post by **stingray751** » Fri Oct 31, 2008 2:53 pm

Booth Light Mod

weaver87 · Post by **weaver87** » Sat Nov 01, 2008 12:29 pm

stingray751 wrote:Booth Light Mod

Hi stingray751,

Nice job! This is the REAR FOG LIGHTS. KM does not fit any bulbs inside n it acts just like a reflector on all our cars.

It's time u show us how to do it. Did u use LED lights for the bulb inside? I am interested but would like to know what kind of bulbs u use to match the red color indensity with the current brake lights on both sides.

Thx!

hhong · Post by **hhong** » Sat Nov 01, 2008 10:35 pm

nicely done rear foglights...should be the normal halogen bulb?

i wanted it to be done via a switch which i can on and off...

can advise where this is done up? pm please

weaver87 · Post by **weaver87** » Sat Nov 01, 2008 10:41 pm

stingray751 wrote:Booth Light Mod

stingray751,

I realise yr 3rd brake light is gone! Did u unplug that to connect to your fog lights as shown? Is this what u mean by your internal booth light?

Or did u really tap a parallel wire from the both brake lights on both sides? If so, what happen to your 3rd brake light?

Hmm.....
weaver

stingray751 · Post by **stingray751** » Sat Nov 01, 2008 11:58 pm

Sorry Bros,
The photos was taken sometime back. In that photo it was done only for the parking light. Thats why you don't see the third brake light.
I just recently upgraded by adding the brake light, but no photos yet

Its was diy, so cannot say thats its a good job.

hhong · Post by **hhong** » Sun Nov 02, 2008 8:58 am

nevertheless it is a good job well done!

side track...i went to Leng Kee KAH and saw at least 2 other CP. one white and one black. both should be CP1 with nice numbers as well.

white CP owner not in sight but the black CP owner is a lady.

was wondering if both CP owners are in this forum? black CP number is 9229 or something...it should be a retained car plate number.

vti magnesium · Post by **vti magnesium** » Mon Nov 03, 2008 4:08 am

think getting more and more cp on the road already. at least will see 3 on the road each day.
not so unique for cp le...

hhong · Post by **hhong** » Mon Nov 03, 2008 1:11 pm

ya...i saw at one stretch 3 CPs all in the eastern part of sg yesterday...

one of them 8008...

nice number bro...if u r in here.