Page 1 of 1

GB: Handling Mods for CL7R/A

Posted: Sun Oct 09, 2011 2:53 pm
by Seraphblade
Hi bros,

I've recently contacted the Ultra Racing distributor in Singapore for a quotation for full handling enhancement for our ride. This includes Top Strut Bar, Front Lower Bar, Rear Lower Bar, and Rear Anti Roll Bar.

There are a few more stuff for our car, such as fender bar, side lower bar, etc, but I think they are not really necessary, but nonetheless, if any brothers want them, I can try to get a lower price.

Reason why I've decided to choose this brand is due to the comprehensive coverage and competitive pricing.

(Have tried to contact Carbing, Whiteline, Summit, etc, but either they do not offer the full range of enhancements or they are just too expensive. Eg. Whiteline only have rear arb for our car, carbing only have rear lower frame at the moment.)

Below is the initial price from the distributor:
Front Strut Bar (FSB) : 150
Front Lower Bar (FLB) : 130 per piece (our car need 2 piece)
Rear Lower Bar (RLB) : 215
Rear Anti Roll Bar (RARB) : 280

Prices are with installation.


1. Seraphblade (91598193) / 2 x FLB + RLB + RARB
2.
3.
4.
5.

Posted: Sun Oct 09, 2011 8:09 pm
by Seraphblade
Please note that the prices are just an estimate for no discount. should be able to get 10% off. Also, will be cheaper price if you do not want to include installation.

Re: GB: Handling Mods for CL7R/A

Posted: Tue Oct 11, 2011 9:15 pm
by lokey
Seraphblade wrote:Hi bros,

I've recently contacted the Ultra Racing distributor in Singapore for a quotation for full handling enhancement for our ride. This includes Top Strut Bar, Front Lower Bar, Rear Lower Bar, and Rear Anti Roll Bar.

There are a few more stuff for our car, such as fender bar, side lower bar, etc, but I think they are not really necessary, but nonetheless, if any brothers want them, I can try to get a lower price.

Reason why I've decided to choose this brand is due to the comprehensive coverage and competitive pricing.

(Have tried to contact Carbing, Whiteline, Summit, etc, but either they do not offer the full range of enhancements or they are just too expensive. Eg. Whiteline only have rear arb for our car, carbing only have rear lower frame at the moment.)

Below is the initial price from the distributor:
Front Strut Bar (FSB) : 150
Front Lower Bar (FLB) : 130 per piece (our car need 2 piece)
Rear Lower Bar (RLB) : 215
Rear Anti Roll Bar (RARB) : 280

Prices are with installation.


1. Seraphblade (91598193) / 2 x FLB + RLB + RARB
2.
3.
4.
5.
Hmm Bro,

can let me know where u found out about the rear carbing bar?

Been looking for it...

Thanks!

Can contact me at 94363788.

Posted: Tue Oct 11, 2011 9:24 pm
by Seraphblade
No more liao. The last one I saw was @ Garage R like in late June, going for 260 with installation... Should have gotten it back then...

You can try to order it now, prolly in the range of 350 - 400.

Posted: Wed Oct 12, 2011 10:45 pm
by BlackKnight_CM5
Hi Bro,

I am interested in the rear anti roll bar but find the prie of $280 pretty steep. If I recall, I got my comptech cheaper a couple of years back. :cry:

Posted: Wed Oct 12, 2011 11:13 pm
by Rcar
Bro, I did mine at Vis Auto at Permas just last week
Front Strut bar at RM$250 and anti roll bar at $$510, inclusive of installation, 30 mins wait !

Posted: Thu Oct 13, 2011 6:51 am
by Seraphblade
Closing this gb.


I'm gg to JB to install too. SG distributor is just too ex.

Posted: Thu Oct 13, 2011 8:36 am
by 1110
Hi
Anyone has not so gd experience or heard of incident of changing the ARB will cause others component to give way pre-maturely? Saw someone posting many years ago that's why until now I still have not upgrade yet.

Thks

Posted: Thu Oct 13, 2011 9:18 am
by Speed-R
1110 wrote:Hi
Anyone has not so gd experience or heard of incident of changing the ARB will cause others component to give way pre-maturely? Saw someone posting many years ago that's why until now I still have not upgrade yet.

Thks
yup, more for track usage, daily driving really need that?? up to individual preference :lol:

Posted: Thu Oct 13, 2011 9:23 am
by BlackKnight_CM5
Hi Bro,

Can U help me buy one? Thanx..... :wink: I can TT U...when r u going?
Seraphblade wrote:Closing this gb.


I'm gg to JB to install too. SG distributor is just too ex.

Posted: Thu Oct 13, 2011 10:32 am
by Rcar
BlackKnight_CM5 wrote:Hi Bro,

Can U help me buy one? Thanx..... :wink: I can TT U...when r u going?
Seraphblade wrote:Closing this gb.


I'm gg to JB to install too. SG distributor is just too ex.
Bro, you need mechanics to install for you lah !! Especially the ARB.

Posted: Thu Oct 13, 2011 11:33 am
by BlackKnight_CM5
Of cos I know lah....I wanna know cash & carry how much mah. My mechanic can do it for me next time when I service mah.... :wink:
Rcar wrote:
BlackKnight_CM5 wrote:Hi Bro,

Can U help me buy one? Thanx..... :wink: I can TT U...when r u going?
Seraphblade wrote:Closing this gb.


I'm gg to JB to install too. SG distributor is just too ex.
Bro, you need mechanics to install for you lah !! Especially the ARB.

Re: GB: Handling Mods for CL7R/A

Posted: Thu Nov 01, 2018 11:47 am
by rayray888
Seraphblade wrote:Hi bros,

I've recently contacted the Ultra Racing distributor in Singapore for a quotation for full handling enhancement for our ride. This includes Top Strut Bar, Front Lower Bar, Rear Lower Bar, and Rear Anti Roll Bar.

There are a few more stuff for our car, such as fender bar, side lower bar, etc, but I think they are not really necessary, but nonetheless, if any brothers want them, I can try to get a lower price.

Reason why I've decided to choose this brand is due to the comprehensive coverage and competitive pricing.

(Have tried to contact Carbing, Whiteline, Summit, etc, but either they do not offer the full range of enhancements or they are just too expensive. Eg. Whiteline only have rear arb for our car, carbing only have rear lower frame at the moment.)

Below is the initial price from the distributor:
Front Strut Bar (FSB) : 150
Front Lower Bar (FLB) : 130 per piece (our car need 2 piece)
Rear Lower Bar (RLB) : 215
Rear Anti Roll Bar (RARB) : 280

Prices are with installation.


1. Seraphblade (91598193) / 2 x FLB + RLB + RARB
2.
3.
4.
5.
Fender Roll Bros at Serangoon. One & Only Home-Based in a Sheltered Bungalow. $50 each side. We will HAMMER, ROLL, TRIM to the MAXIMUM for you at one price, $50 each side. Whatsapp 9002 9923.

Re: GB: Handling Mods for CL7R/A

Posted: Thu Nov 01, 2018 11:48 am
by rayray888
Seraphblade wrote:Hi bros,

I've recently contacted the Ultra Racing distributor in Singapore for a quotation for full handling enhancement for our ride. This includes Top Strut Bar, Front Lower Bar, Rear Lower Bar, and Rear Anti Roll Bar.

There are a few more stuff for our car, such as fender bar, side lower bar, etc, but I think they are not really necessary, but nonetheless, if any brothers want them, I can try to get a lower price.

Reason why I've decided to choose this brand is due to the comprehensive coverage and competitive pricing.

(Have tried to contact Carbing, Whiteline, Summit, etc, but either they do not offer the full range of enhancements or they are just too expensive. Eg. Whiteline only have rear arb for our car, carbing only have rear lower frame at the moment.)

Below is the initial price from the distributor:
Front Strut Bar (FSB) : 150
Front Lower Bar (FLB) : 130 per piece (our car need 2 piece)
Rear Lower Bar (RLB) : 215
Rear Anti Roll Bar (RARB) : 280

Prices are with installation.


1. Seraphblade (91598193) / 2 x FLB + RLB + RARB
2.
3.
4.
5.
Fender Roll Bros at Serangoon. One & Only Home-Based in a Sheltered Bungalow. $50 each side. We will HAMMER, ROLL, TRIM to the MAXIMUM for you at one price, $50 each side. Whatsapp 9002 9923.