ideal rim size for odyssey RB3
ideal rim size for odyssey RB3
looking to upgrade stock rim.
any ideal which is the best size.
oso, anyone knows the PCD offset of this mpv?
any ideal which is the best size.
oso, anyone knows the PCD offset of this mpv?
Rgds,
Sean
Sean
I think the PCD is 5-114.3
At least thats what I see in the websites below...If not, is it possible to check from the manual?
http://goods.autoc-one.jp/wheel/honda/odyssey/
http://www.mzspeed.co.jp/wheel/jjChromo ... gData.html
At least thats what I see in the websites below...If not, is it possible to check from the manual?
http://goods.autoc-one.jp/wheel/honda/odyssey/
http://www.mzspeed.co.jp/wheel/jjChromo ... gData.html
- Nov -
09 Miku RB3 ODC
Slow and not so steady...
09 Miku RB3 ODC
Slow and not so steady...
Yes, the PCD is 5-114.3
The offset for both the factory fitted EX model rims (215/60 R16) and EXV model (215/55 R17) are +55. I am driving the EX model with 16" rims and recently upgraded to the factory fitted 17" rims (take-off rims). I took a look at both the rims during the change in the tyre shop and noticed both the offset are +55 (engraved on the inside of the rims). And both rims are made by Enkei.
The answer to your question on the ideal size is dependant on what you look for - comfort, handling or look. 16" tyres gives you more comfort (on stock A349 tyres). I find my new 17" tyres (bridgestone GR90) have better handling (eg cornering) but the ride is slightly harder and noiser. In terms of look, I find 17" look more balanced with our long car, plus the 16" rims is more difficult to clean.
If you ask me whether I'll do it again if given a choice, the answer is yes.
By the way, I realize after doing some research that all regular odysseys sold in Japan are on 16" tyres, except the Absolute version. I suppose the Japs may value comfort more than handling.
Hope this helps.
The offset for both the factory fitted EX model rims (215/60 R16) and EXV model (215/55 R17) are +55. I am driving the EX model with 16" rims and recently upgraded to the factory fitted 17" rims (take-off rims). I took a look at both the rims during the change in the tyre shop and noticed both the offset are +55 (engraved on the inside of the rims). And both rims are made by Enkei.
The answer to your question on the ideal size is dependant on what you look for - comfort, handling or look. 16" tyres gives you more comfort (on stock A349 tyres). I find my new 17" tyres (bridgestone GR90) have better handling (eg cornering) but the ride is slightly harder and noiser. In terms of look, I find 17" look more balanced with our long car, plus the 16" rims is more difficult to clean.
If you ask me whether I'll do it again if given a choice, the answer is yes.
By the way, I realize after doing some research that all regular odysseys sold in Japan are on 16" tyres, except the Absolute version. I suppose the Japs may value comfort more than handling.
Hope this helps.
rims
TCN wrote:Yes, the PCD is 5-114.3
The offset for both the factory fitted EX model rims (215/60 R16) and EXV model (215/55 R17) are +55. I am driving the EX model with 16" rims and recently upgraded to the factory fitted 17" rims (take-off rims). I took a look at both the rims during the change in the tyre shop and noticed both the offset are +55 (engraved on the inside of the rims). And both rims are made by Enkei.
The answer to your question on the ideal size is dependant on what you look for - comfort, handling or look. 16" tyres gives you more comfort (on stock A349 tyres). I find my new 17" tyres (bridgestone GR90) have better handling (eg cornering) but the ride is slightly harder and noiser. In terms of look, I find 17" look more balanced with our long car, plus the 16" rims is more difficult to clean.
If you ask me whether I'll do it again if given a choice, the answer is yes.
By the way, I realize after doing some research that all regular odysseys sold in Japan are on 16" tyres, except the Absolute version. I suppose the Japs may value comfort more than handling.
Hope this helps.
Hi there,
i m considering between 17 & 18"
becos up 1 size dun seems to be very value for money( i am changing to other rim makes).
but up to 18" dunno will be very hard and noisy on ride or not....
i oso looking for the KNN drop-in filter but to no avail...
have u change tat too? i not in mod so only keen to change the batt,filter and rims.... as i find our engine is very powerful liao...
Rgds,
Sean
Sean
Re: rims
18" is better in terms of looks.noise is dependent on tyre profile and brands. I am letting go my brand new 8kg forged rim which is one of the lightest 18" in the market, save FC and better acceleration. Oh and reason for selling is because I am using back my old repaired rim which was down for a week.
Sean wrote:TCN wrote:Yes, the PCD is 5-114.3
The offset for both the factory fitted EX model rims (215/60 R16) and EXV model (215/55 R17) are +55. I am driving the EX model with 16" rims and recently upgraded to the factory fitted 17" rims (take-off rims). I took a look at both the rims during the change in the tyre shop and noticed both the offset are +55 (engraved on the inside of the rims). And both rims are made by Enkei.
The answer to your question on the ideal size is dependant on what you look for - comfort, handling or look. 16" tyres gives you more comfort (on stock A349 tyres). I find my new 17" tyres (bridgestone GR90) have better handling (eg cornering) but the ride is slightly harder and noiser. In terms of look, I find 17" look more balanced with our long car, plus the 16" rims is more difficult to clean.
If you ask me whether I'll do it again if given a choice, the answer is yes.
By the way, I realize after doing some research that all regular odysseys sold in Japan are on 16" tyres, except the Absolute version. I suppose the Japs may value comfort more than handling.
Hope this helps.
Hi there,
i m considering between 17 & 18"
becos up 1 size dun seems to be very value for money( i am changing to other rim makes).
but up to 18" dunno will be very hard and noisy on ride or not....
i oso looking for the KNN drop-in filter but to no avail...
have u change tat too? i not in mod so only keen to change the batt,filter and rims.... as i find our engine is very powerful liao...
http://www.prodrive-japan.com/products/ ... llery.html
There is an Odessey inside the prodrive's gallery. Can view as reference for info.
There is an Odessey inside the prodrive's gallery. Can view as reference for info.
prodrive
wilson76 wrote:http://www.prodrive-japan.com/products/ ... llery.html
There is an Odessey inside the prodrive's gallery. Can view as reference for info.
but it don't look good on Odyssey. spoke too thin. odyssey got alot of metal.... further more the one in the pic seems 19/20 inch..
Rgds,
Sean
Sean
if get 45offset, dun get too big rims, get 16 or 17 inch ok liaoODYXPRESS wrote:Revive this thread...
Factory Rims Offset 55
Can fit 45 but will protrude so if lower will have problems?
Or Do 50 ( to be safe)
So who has the nice Flush look and can advise...
Thxs for the Advice...
these r the few types
http://www.efxsoft.com/sgtyres/tr1c.asp ... &rimdia=00
- parameswaryshana
- 1000rpm
- Posts: 12
- Joined: Sun Oct 25, 2015 10:25 am
Re: ideal rim size for odyssey RB3
I have rb3 original rim 18inch
Sent from my SM-N910G using Tapatalk
Sent from my SM-N910G using Tapatalk