Page 1 of 1
some advice needed
Posted: Thu Mar 04, 2010 1:57 am
by charles
how often do we need to change engine mounting? any good workshop to recommend and whats the damage like? thank you in advance!
Posted: Thu Mar 04, 2010 9:55 pm
by Mugen Boi
u dun change engine mountings often...u only change it when it's spoilt

engine mount
Posted: Fri Mar 05, 2010 12:32 am
by daboy14
you dont change/replace it unless its damaged/spoilt..
diiffrent brands out there it depends on ur application wether
race track or daily use..
Posted: Mon Mar 08, 2010 4:08 am
by charles
thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
Posted: Mon Mar 08, 2010 10:07 pm
by eeee78
charles wrote:thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
Vibration can be feel when engine is idling
Posted: Mon Mar 08, 2010 11:10 pm
by charles
Should be normal vibrations . Not very extreme. Then wat could be the problem be?
Posted: Thu Mar 11, 2010 7:10 pm
by redeye
What car are you driving if it an EG ,EK
it vibrate because it an old car dont sweat too much over it

Posted: Thu Mar 11, 2010 9:49 pm
by ivant9029
charles wrote:thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
Send to the workshop...

Posted: Fri Mar 12, 2010 1:49 pm
by charles
thank you for the replies. I'm driving an ES(2004), any good workshop to recommend?
Posted: Sat Apr 17, 2010 9:26 am
by Gresini
2004 car eng mounting spoil???
Posted: Sat Apr 17, 2010 9:54 am
by charles
Mounting no issue, lower arm bushing worn out
Posted: Sat May 01, 2010 11:13 pm
by benade74
charles wrote:Mounting no issue, lower arm bushing worn out
I also drive 2004 ES5.. just change all my mounting at Autosaver Toh Guan..
Posted: Fri May 07, 2010 2:57 am
by charles
Whats the damage like? thanks!
Posted: Wed Jun 02, 2010 12:23 pm
by Gresini
Wah... All so rich... Change mounting...
I planning to inject silicone into my mounting...
CHEAP cheap upgrade+replacement!!!

Posted: Fri Jun 04, 2010 11:11 am
by dragger
Hi,
Busted Engine mount can loose torque & power.
More vibrations when idle & even running.
You will know if its damage by looking on it, if its cracked or tear.