Civic model year 1980 - 2000
-
swat80
- 3000rpm
- Posts: 44
- Joined: Thu Apr 09, 2009 1:12 pm
Post
by swat80 » Sat May 16, 2009 6:56 pm
hi bro.. my car broke down today and my mechanic say the distributor up the lorry liao.. anyone know how much it cost? and any bro here selling???
-
Emperorcivic
- 9000rpm Rev Cut
- Posts: 3055
- Joined: Wed May 02, 2007 4:02 pm
- Location: Singapore
-
Contact:
Post
by Emperorcivic » Sun May 17, 2009 5:03 am
ard $150. recon.
-
David_Tan52
- 8000rpm Red Line
- Posts: 2289
- Joined: Thu Mar 16, 2006 12:21 pm
Post
by David_Tan52 » Sun May 17, 2009 10:04 am
i have 1 use one at home.. u want can have it at $70..
-
swat80
- 3000rpm
- Posts: 44
- Joined: Thu Apr 09, 2009 1:12 pm
Post
by swat80 » Mon May 18, 2009 12:08 am
hi david, is it still functioning good?? hmm is it common for the distributor to spolit easily??
-
David_Tan52
- 8000rpm Red Line
- Posts: 2289
- Joined: Thu Mar 16, 2006 12:21 pm
Post
by David_Tan52 » Mon May 18, 2009 12:31 am
took out from my car 1 yr ago when i upgraded. U can take and try first.. if ok then pass me $..
-
swat80
- 3000rpm
- Posts: 44
- Joined: Thu Apr 09, 2009 1:12 pm
Post
by swat80 » Mon May 18, 2009 12:52 am
but my car now at a workshop ay ubi. the person say he dun have spare part and got to source.. anyway u can pass to me to test??
-
rx7
- 6000rpm VTEC ON
- Posts: 408
- Joined: Wed Apr 16, 2008 8:01 pm
- Location: Serangoon
Post
by rx7 » Mon May 18, 2009 2:12 am
Should be able to find easily, recon ones $00-120 plus
-
David_Tan52
- 8000rpm Red Line
- Posts: 2289
- Joined: Thu Mar 16, 2006 12:21 pm
Post
by David_Tan52 » Mon May 18, 2009 11:28 am
i stay tamp. u can come collect it in the night time.
-
swat80
- 3000rpm
- Posts: 44
- Joined: Thu Apr 09, 2009 1:12 pm
Post
by swat80 » Mon May 18, 2009 2:11 pm
thanks to all the bros who reply.. i got slapped w a bill of $230 for changing a new PC board inside the distributor. i cant afford to wait as i need the car for work.
thanks for helping..
-
9534
- 5000rpm
- Posts: 174
- Joined: Wed Mar 11, 2009 10:58 am
- Location: East Side
Post
by 9534 » Tue May 19, 2009 9:12 am
Hi David. Ur distributor is it still in good working condition ?
VTEC
(Variable Valve Timing and Lift Electronic Control)
-
David_Tan52
- 8000rpm Red Line
- Posts: 2289
- Joined: Thu Mar 16, 2006 12:21 pm
Post
by David_Tan52 » Tue May 19, 2009 10:57 am
9534 wrote:Hi David. Ur distributor is it still in good working condition ?
U smsed me this morning?
It should be.. I took it out when it's still working for my upgrade a yr ago.
Kept it in my storeroom for a yr. Thought i lost it but bought a new one replace, then later found it. damn... wasted $ xtremez bro~~~~~~~~~~ i wana eat the distributor up..
-
Dscheng
- 6000rpm VTEC ON
- Posts: 456
- Joined: Sun Feb 11, 2007 4:20 am
Post
by Dscheng » Tue May 19, 2009 2:15 pm
swat80 wrote:thanks to all the bros who reply.. i got slapped w a bill of $230 for changing a new PC board inside the distributor. i cant afford to wait as i need the car for work.
thanks for helping..
PC board inside the distributor? Wow.. So now your distributor consider new loh.
-
EK Type-R
- 8000rpm Red Line
- Posts: 1513
- Joined: Mon Feb 23, 2004 9:48 am
- Location: Novena, SG
Post
by EK Type-R » Wed May 20, 2009 1:35 pm
to recondition your stock Honda TEC or Hitachi distributor to brand-new condition you'll these parts at the stockist.. shd cost <$150 for the following:
- Ignition coil
- Ignitor (or Ignition Control Module)
- Distributor oil seal (22.5 x 12.5 x 5mm)
- Distributor O-ring
- Rotor
- Distributor cap with gasket
-
swat80
- 3000rpm
- Posts: 44
- Joined: Thu Apr 09, 2009 1:12 pm
Post
by swat80 » Wed May 20, 2009 6:34 pm
i think the mechanic replace a new Ignitor (or Ignition Control Module) for me but then total he charged me $230 for the job..
next to replace is my gearbox.. i think my 2nd gear up the lorry soon too.. when i start my engine and want to move off.. the car will jerk and cannot move for awhile.
-
snookium
- 6000rpm VTEC ON
- Posts: 537
- Joined: Sat Sep 18, 2004 2:27 am
- Location: AMK
-
Contact:
Post
by snookium » Mon May 25, 2009 9:28 pm
swat80 wrote:i think the mechanic replace a new Ignitor (or Ignition Control Module) for me but then total he charged me $230 for the job..
next to replace is my gearbox.. i think my 2nd gear up the lorry soon too.. when i start my engine and want to move off.. the car will jerk and cannot move for awhile.
Pls change your mechanic... I was only charge 90 bucks for it. Install at Ah Heng workshop.