CL7A part Nos
Re: CL7A part Nos
I think the left front door actuator number may be wrong but I need to double check once Min Ghee or Thian Seng reopens for business.sub wrote:Some part number for the A bros. collected from what i changed over the years. Price est from Tanly/Thian Seng
1. Compressor Belt - 38920-RBA-003 - $30
2. Fuel Filter - 16010-SEA-000 - $45
3. Rear Engine mounting - 50810-SDA-A02 - $115
4. Transmission upper mount - 20870-SEA-E01 - $55
5. Front engine mounting - 50830-SDA-A03 - $120
6. Water pump - 19200-RFE-003 - $105
7. HAMP oil filter - 15400-PLC-505 - $7
8. ATF filter25430-PLR-003 - $20
9. Side engine mounting - 50820-SEA-001 - $85
10. Right front door rubber - 72325-SEA-003 - $60
11. Left front door rubber - 72365-SEA-003 - $60
12. Stock ARB bushing - 52306-SDA-A01 - $10
13. Driver door actuator - 72115-SDA-A01 - $110
14. Left front door actuator - 42155-SDA-A11 - $120
Prices only as a guide. Bros who have more pls add in
Because when I went to KM's part dept and check out the CM part manual, the front right door actuator's part number is correct as above, but the left front one is 72155-SDA-A01.
It doesn't make sense to me that the CL and CM shares the same part for the right but not the left???
Re: CL7A part Nos
ok just bought the part from Min Ghee today -- confirmed it is 72155-SDA-A01 for front left door actuator.ml2spin wrote:I think the left front door actuator number may be wrong but I need to double check once Min Ghee or Thian Seng reopens for business.sub wrote:Some part number for the A bros. collected from what i changed over the years. Price est from Tanly/Thian Seng
1. Compressor Belt - 38920-RBA-003 - $30
2. Fuel Filter - 16010-SEA-000 - $45
3. Rear Engine mounting - 50810-SDA-A02 - $115
4. Transmission upper mount - 20870-SEA-E01 - $55
5. Front engine mounting - 50830-SDA-A03 - $120
6. Water pump - 19200-RFE-003 - $105
7. HAMP oil filter - 15400-PLC-505 - $7
8. ATF filter25430-PLR-003 - $20
9. Side engine mounting - 50820-SEA-001 - $85
10. Right front door rubber - 72325-SEA-003 - $60
11. Left front door rubber - 72365-SEA-003 - $60
12. Stock ARB bushing - 52306-SDA-A01 - $10
13. Driver door actuator - 72115-SDA-A01 - $110
14. Left front door actuator - 42155-SDA-A11 - $120
Prices only as a guide. Bros who have more pls add in
Because when I went to KM's part dept and check out the CM part manual, the front right door actuator's part number is correct as above, but the left front one is 72155-SDA-A01.
It doesn't make sense to me that the CL and CM shares the same part for the right but not the left???
- Gingerfish
- 6000rpm VTEC ON
- Posts: 352
- Joined: Tue Jul 29, 2008 12:41 pm
- Location: WTCC
- Gingerfish
- 6000rpm VTEC ON
- Posts: 352
- Joined: Tue Jul 29, 2008 12:41 pm
- Location: WTCC
Bro, actually this can be done at 140K according to TS unless coolant level is always low or leakage. I see that the location of it is actually in the mid section right above crankshft flywheel hence decided to do the renewal once and for all since i'm cange the belt and tensioner in one labour costxhareshx wrote:Gingerfish wrote:latest price...from TS
1) Fuel filter - $50
2) So call Orginal Ac Belt - $65
3) Cooling pump - $120
4) Belt tensioner - $100
cooling pump = waterpump?
are these the addional parts tt are needed to be changed during the 80k servicing?
Gingerfish wrote:Bro, actually this can be done at 140K according to TS unless coolant level is always low or leakage. I see that the location of it is actually in the mid section right above crankshft flywheel hence decided to do the renewal once and for all since i'm cange the belt and tensioner in one labour costxhareshx wrote:Gingerfish wrote:latest price...from TS
1) Fuel filter - $50
2) So call Orginal Ac Belt - $65
3) Cooling pump - $120
4) Belt tensioner - $100
cooling pump = waterpump?
are these the addional parts tt are needed to be changed during the 80k servicing?
thanks how about fuel filter and atf fliter?
- Gingerfish
- 6000rpm VTEC ON
- Posts: 352
- Joined: Tue Jul 29, 2008 12:41 pm
- Location: WTCC
Bro, i reckon Fuel filter can be change at 80 - 90K which is more than enough usage, cause when i saw the used filter, its like cloaked. And after renewing, ride does not feel sluggish during gear drop.xhareshx wrote:Gingerfish wrote:Bro, actually this can be done at 140K according to TS unless coolant level is always low or leakage. I see that the location of it is actually in the mid section right above crankshft flywheel hence decided to do the renewal once and for all since i'm cange the belt and tensioner in one labour costxhareshx wrote:
cooling pump = waterpump?
are these the addional parts tt are needed to be changed during the 80k servicing?
thanks how about fuel filter and atf fliter?
ATF filter should be change during ATF fluid change altogether since we are using new gear oil? every 30K or 2yr?
Gingerfish wrote:Bro, i reckon Fuel filter can be change at 80 - 90K which is more than enough usage, cause when i saw the used filter, its like cloaked. And after renewing, ride does not feel sluggish during gear drop.xhareshx wrote:Gingerfish wrote: Bro, actually this can be done at 140K according to TS unless coolant level is always low or leakage. I see that the location of it is actually in the mid section right above crankshft flywheel hence decided to do the renewal once and for all since i'm cange the belt and tensioner in one labour cost
thanksbro. have to go get all of them changed
thanks how about fuel filter and atf fliter?
ATF filter should be change during ATF fluid change altogether since we are using new gear oil? every 30K or 2yr?