Honda's latest 8th generation Accord
-
weaver87
- 6000rpm VTEC ON

- Posts: 627
- Joined: Mon Sep 08, 2008 12:12 am
- Location: Where u find rides....
Post
by weaver87 » Sat Aug 15, 2009 12:03 am
bro, shc meet up is usually at car park G in stadium.
For meet up, can meet at any location where it is convenient and got sufficient parking lots...if got coffee shop...even better...wont get thirsty...

-
urbanx
- 6000rpm VTEC ON

- Posts: 557
- Joined: Wed Jul 20, 2005 2:00 pm
- Location: This Planet
-
Contact:
Post
by urbanx » Sun Aug 16, 2009 9:01 pm
What is stock size of tyre for PI Accord ?
It is 235/45R18 ? what brand is it ?
-
lingamair
- 6000rpm VTEC ON

- Posts: 372
- Joined: Sun Aug 07, 2005 8:57 pm
Post
by lingamair » Mon Aug 17, 2009 1:04 am
Mine is the standard version, so Yokohama E70 tyres, 225/50/R17 98V.
-
lingamair
- 6000rpm VTEC ON

- Posts: 372
- Joined: Sun Aug 07, 2005 8:57 pm
Post
by lingamair » Sat Aug 22, 2009 7:16 pm
Saw a nice BLUE Accord Euro (Vincar) at a Pasir Ris fish shop, in the same premise as U-Petgamart. Very nice car and nice rims! Plus you've got the "EURO" badge too

-
loh_jeff
- 6000rpm VTEC ON

- Posts: 440
- Joined: Tue Aug 10, 2004 1:54 am
- Location: alexcier
Post
by loh_jeff » Fri Aug 28, 2009 11:20 am
gkotody wrote:I called up 3 PIs & they quoted me $34K omv for the JDM Accord but when I called Vincar, their omv was only bet $22-25K.Can anyone enlighten on the difference?

pm best offer for cu2 send
-
lingamair
- 6000rpm VTEC ON

- Posts: 372
- Joined: Sun Aug 07, 2005 8:57 pm
Post
by lingamair » Tue Sep 01, 2009 4:24 pm
Anybody going for the Sep SHC meetup? Would be nice to meet up with other CUs & CPs there.
-
James_Low
- 3000rpm

- Posts: 58
- Joined: Sun May 23, 2004 10:24 pm
- Location: Singapore
Post
by James_Low » Thu Sep 03, 2009 3:35 pm
I am fine with the meetup.. Can i know what is the timing normally for the meetup?
-
lingamair
- 6000rpm VTEC ON

- Posts: 372
- Joined: Sun Aug 07, 2005 8:57 pm
Post
by lingamair » Thu Sep 03, 2009 4:21 pm
I should be there around 9ish/10ish..
-
James_Low
- 3000rpm

- Posts: 58
- Joined: Sun May 23, 2004 10:24 pm
- Location: Singapore
Post
by James_Low » Fri Sep 04, 2009 1:14 pm
lingamair wrote:I should be there around 9ish/10ish..
ok,, i should be there as well... Anybody else going from CP/CU?
Bro Weaver, u coming?
-
James_Low
- 3000rpm

- Posts: 58
- Joined: Sun May 23, 2004 10:24 pm
- Location: Singapore
Post
by James_Low » Mon Sep 07, 2009 7:38 pm
hi all, anyone interested to join the cl7 for meetup tonight?
we will be there at railway mall after 930pm..
hope to see u guys..
-
weaver87
- 6000rpm VTEC ON

- Posts: 627
- Joined: Mon Sep 08, 2008 12:12 am
- Location: Where u find rides....
Post
by weaver87 » Tue Sep 08, 2009 5:31 pm
bro lingamair,
Nice to meet u last nite!
Bro James, dun forget to check yr findings for the BBK lobang and advise us in return!!
Shit...last nite took the kopi and nearly cannot sleep after reaching home!!!

-
lingamair
- 6000rpm VTEC ON

- Posts: 372
- Joined: Sun Aug 07, 2005 8:57 pm
Post
by lingamair » Tue Sep 08, 2009 7:18 pm
Nice to meet Mr. Weaver & James too! Very itchy to go GZ now. Damn!
-
MrMurderman
- 10 000rpm Over Rev

- Posts: 6739
- Joined: Wed Nov 21, 2007 4:00 pm
- Location: Singapore (CCK)
Post
by MrMurderman » Wed Sep 09, 2009 10:44 am
dont posion urself too much.... nice accord euro...

殺很大!ï¼
-
weaver87
- 6000rpm VTEC ON

- Posts: 627
- Joined: Mon Sep 08, 2008 12:12 am
- Location: Where u find rides....
Post
by weaver87 » Wed Sep 09, 2009 4:23 pm
he does need some poisons....then can be as nice as yrs....

-
James_Low
- 3000rpm

- Posts: 58
- Joined: Sun May 23, 2004 10:24 pm
- Location: Singapore
Post
by James_Low » Wed Sep 09, 2009 4:38 pm
Bro weaver, i will be going to the workshop this fews and i will update you guys on the BBK. That night at 4am after drinking your kopi 'O"...
I will be dropping by garage R as well to ask for the HKS exhuast for CU2.. Perhaps got to indent it and be the first few to send it for approval by LTA.. You interested? i can also ask for CP as well..