Page 5 of 25
Posted: Sat Feb 26, 2005 10:22 pm
by thepukster
joon wrote:went to check out the 95 ES again.. 1st time i saw the spoon calipers close up.. man he's only got 1mm clearance to the spoke of his rims.. MINUS points man.. he either doesn't know what he's doing, or is too cheap to run spacers -> i'd want at least a 4mm gap so that any stone chips caught into the wheel cylinder won't chip my precious 2K calipers.. i already have 2 chips on my prelude's already
hesitant to respray my calipers tho'.. but when i do pass them on, i'll sand off the paint so the new fella can spray whatever colour he wants haha
Was at my regular spraypaint shop this afternoon, saw a red euro-r with the spoon caliper with mugen rims. i swear the clearance was also 1mm thereabouts. F*** man..... anyway my bumper done up liao.
Posted: Sat Feb 26, 2005 10:27 pm
by AliasR
thepukster wrote:joon wrote:went to check out the 95 ES again.. 1st time i saw the spoon calipers close up.. man he's only got 1mm clearance to the spoke of his rims.. MINUS points man.. he either doesn't know what he's doing, or is too cheap to run spacers -> i'd want at least a 4mm gap so that any stone chips caught into the wheel cylinder won't chip my precious 2K calipers.. i already have 2 chips on my prelude's already
hesitant to respray my calipers tho'.. but when i do pass them on, i'll sand off the paint so the new fella can spray whatever colour he wants haha
Was at my regular spraypaint shop this afternoon, saw a red euro-r with the spoon caliper with mugen rims. i swear the clearance was also 1mm thereabouts. F*** man..... anyway my bumper done up liao.
Do u feel sleepy??
f***!!! i'm sleepless...i need kopi-o and a honda tuning mag!!!
Posted: Sat Feb 26, 2005 10:28 pm
by thepukster
AliasR wrote:
Was at my regular spraypaint shop this afternoon, saw a red euro-r with the spoon caliper with mugen rims. i swear the clearance was also 1mm thereabouts. F*** man..... anyway my bumper done up liao.
Do u feel sleepy??
f***!!! i'm sleepless...i need kopi-o and a honda tuning mag!!![/quote]
Eh? GayliasR, what you doing at home? Never go out with Suzy?
Posted: Sat Feb 26, 2005 10:30 pm
by AliasR
thepukster wrote:AliasR wrote:
Was at my regular spraypaint shop this afternoon, saw a red euro-r with the spoon caliper with mugen rims. i swear the clearance was also 1mm thereabouts. F*** man..... anyway my bumper done up liao.
Do u feel sleepy??
f***!!! i'm sleepless...i need kopi-o and a honda tuning mag!!!
Eh? GayliasR, what you doing at home? Never go out with Suzy?[/quote]
sat nite stay at home..standard!!! like u like dat...
Posted: Sat Feb 26, 2005 10:59 pm
by joon
thepukster wrote:AliasR wrote:
Was at my regular spraypaint shop this afternoon, saw a red euro-r with the spoon caliper with mugen rims. i swear the clearance was also 1mm thereabouts. F*** man..... anyway my bumper done up liao.
Do u feel sleepy??
f***!!! i'm sleepless...i need kopi-o and a honda tuning mag!!!
Eh? GayliasR, what you doing at home? Never go out with Suzy?
errr.. ladies.. you'all are incorrigible!!! please please confine the tokking cock to the main thread.. i was hoping to keep this thread clean for genuine DIY questionS! 
hahaha
Posted: Sat Feb 26, 2005 11:02 pm
by joon
DIY DAY 19th MARCH (SATURDAY)
any violent objections?
Posted: Sat Feb 26, 2005 11:33 pm
by simple
Joon,
Count me in, tks. I got no objection, cheers
Posted: Sat Feb 26, 2005 11:38 pm
by HeavyD75
Fine with me. No objections. Pete, may need to fit the strut bars. Think that can DIY?
Posted: Sun Feb 27, 2005 1:09 am
by Phuturist
joon wrote:DIY DAY 19th MARCH (SATURDAY)
any violent objections?
bro can i meet u guys around 5pm?
Posted: Sun Feb 27, 2005 1:28 am
by joon
HeavyD75 wrote:Fine with me. No objections. Pete, may need to fit the strut bars. Think that can DIY?
no prob bro.. strut bars are easy.. the rear one needs abit of care to cut the trunk lining for a good fit.. but no problems.. either zippyalex or myself we'll show you how
Posted: Sun Feb 27, 2005 1:30 am
by joon
Phuturist wrote:bro can i meet u guys around 5pm?
well if you come at 5+ most likely you won't be able to do much.. we'll try to finish up before dinner
Posted: Sun Feb 27, 2005 11:59 am
by EK_Series
would like to join u guys for DIY but dunno got what things to DIY leh.
Posted: Sun Feb 27, 2005 12:14 pm
by 2BHIGH
19th Mar sounds good.
I think i want to take out the Airmax2 on my ride.
Pete pls guide me along.
Ek_series : Just go there and see see look look and relax lor.
hehhe
Posted: Sun Feb 27, 2005 1:13 pm
by 7Marlboroman
i'll be there to diy my heatshield
Posted: Sun Feb 27, 2005 4:06 pm
by joon
To revive the list again:
Joe - Photographer
Peter - ATF/Caliper
Alex - Heatshield/CAI
Eugene - Entertainment
1. Wilson - Heatshield and CAI for intake
2. Jye - TYC Projector Headlamps install
3. Phuturist - ATF cooler
4. 2BHIGH - Chill Out only....can meet u guys for lunch
5.
6.
7.