Singapore Honda Club

Thks pete for organising the DIY day. and also for helping me with my resonator box. next diy day shall install the flexi tube to the bumper and also if possible try to do a heatshield for my sri.

Had a great time today. thks to all bros who were present.

EK_Series wrote:Thks pete for organising the DIY day. and also for helping me with my resonator box. next diy day shall install the flexi tube to the bumper and also if possible try to do a heatshield for my sri.

Had a great time today. thks to all bros who were present.

Bro,

I also planning to do the flexi tube to the bumper, pls tell me if you can find the tube. Meawhile, i will find out myself, if got any news, update you, ok. Lastly, is there other things that i need to fix the flexi tube, pls advise?

simple wrote:

EK_Series wrote:Thks pete for organising the DIY day. and also for helping me with my resonator box. next diy day shall install the flexi tube to the bumper and also if possible try to do a heatshield for my sri.

Had a great time today. thks to all bros who were present.

Bro,

I also planning to do the flexi tube to the bumper, pls tell me if you can find the tube. Meawhile, i will find out myself, if got any news, update you, ok. Lastly, is there other things that i need to fix the flexi tube, pls advise?

i have an flexi pipe from my previous car. but now dunno where leh. gotta find it. lets check up and info each other. u wanna do a heatshield too?

Sheesh...thought was ok after installation of the oil catch tank.

With aircon ON :
Encountered erratic idling today ranging from 450 ~ 700.
Once it dropped nearly to 350 ( almost stalled ).
Adjusted the screw near the manifold but to no use.

Probably the manifold starved for air.....
I think i will connect the return line back to the IM instead of venting to atmosphere and monitor from there.

Regards,

EK_Series wrote:

simple wrote:

EK_Series wrote:Thks pete for organising the DIY day. and also for helping me with my resonator box. next diy day shall install the flexi tube to the bumper and also if possible try to do a heatshield for my sri.

Had a great time today. thks to all bros who were present.

Bro,

I also planning to do the flexi tube to the bumper, pls tell me if you can find the tube. Meawhile, i will find out myself, if got any news, update you, ok. Lastly, is there other things that i need to fix the flexi tube, pls advise?

i have an flexi pipe from my previous car. but now dunno where leh. gotta find it. lets check up and info each other. u wanna do a heatshield too?

Bro,

I have done the heatshield already. Just wanted to fix the flexi tube, tks.

2BHIGH wrote:Sheesh...thought was ok after installation of the oil catch tank.

With aircon ON :
Encountered erratic idling today ranging from 450 ~ 700.
Once it dropped nearly to 350 ( almost stalled ).
Adjusted the screw near the manifold but to no use.

Probably the manifold starved for air.....
I think i will connect the return line back to the IM instead of venting to atmosphere and monitor from there.

Regards,

Bro,

Sad to hear that, do hope you have plenty of patience during this DIY stage, cheers

simple wrote:

EK_Series wrote:

simple wrote: Bro,

I also planning to do the flexi tube to the bumper, pls tell me if you can find the tube. Meawhile, i will find out myself, if got any news, update you, ok. Lastly, is there other things that i need to fix the flexi tube, pls advise?

i have an flexi pipe from my previous car. but now dunno where leh. gotta find it. lets check up and info each other. u wanna do a heatshield too?

Bro,

I have done the heatshield already. Just wanted to fix the flexi tube, tks.

i found the flexi tube used in my previous car. will try to fix it up. now like no air intake cos no piping used. guess its taking in all the hot air from the engine bay area.

Ok...everyone...finally the my callipers are done...
Here is the Story...
Tried to contact Peter but he went to the church, then remembered that bro tohallan had silver left, so came into the forum and look for his contact number but stunned... can't find any...only got email.
Finally, no choice, went down to Johnson and buy....reach there, he said he only got 2 colors left...Red and Black...bought Red in the end...Oh no, Ah Beng car...

Here is the photos...I started at 1 plus...


Starting Product




After 5 hours of sanding...shag sia...good workout




After 5 hours of spraying...starting to see the fruits of my labour



Final product after 10 hours of hard work. Can see that the photos getting darker and darker liao too...But it was worth it lah...haha...sense of achievement(But I WILL NEVER DO IT AGAIN!!!???)...




Total Cost:
1) VHT Paint - $12.50
2) Sand Paper - $0.30
3) Electricity - Free at Peter's carpark...hahaha

ur picture background tells me u were there from DAY to EVENING wahahahahahah.........

WoOhOoOo wrote:ur picture background tells me u were there from DAY to EVENING wahahahahahah.........

Ya loh Bro...I was working on this the whole afternoon.

Goot job!!!

congratulations to ron for his calipers

next DIY day will probably be 8th or 15th april.. i'll be installing my sparco bucket seat.. so you guys can start planning too if you wana do something..

i think the prelude caliper spraying is quite tiring if you follow my extremely anal methods of sanding and prep.. so if anyone wants to do it pls let me know in advance.. prob hold it on a separate day unless you wana come punctually at 12noon on DIY day (like ron and darren last time haha)

oh and my dad says no smoking! haha he says you can smoke at the gate not in the carpark healthly lifestyle la..

Civician© wrote:Ok...everyone...finally the my callipers are done...
Here is the Story...
Tried to contact Peter but he went to the church, then remembered that bro tohallan had silver left, so came into the forum and look for his contact number but stunned... can't find any...only got email.
Finally, no choice, went down to Johnson and buy....reach there, he said he only got 2 colors left...Red and Black...bought Red in the end...Oh no, Ah Beng car...

Here is the photos...I started at 1 plus...


Starting Product




After 5 hours of sanding...shag sia...good workout




After 5 hours of spraying...starting to see the fruits of my labour



Final product after 10 hours of hard work. Can see that the photos getting darker and darker liao too...But it was worth it lah...haha...sense of achievement(But I WILL NEVER DO IT AGAIN!!!???)...




Total Cost:
1) VHT Paint - $12.50
2) Sand Paper - $0.30
3) Electricity - Free at Peter's carpark...hahaha

bro, thought you said you spraying gold color? anyway it was very well done. good job bro.

joon wrote:congratulations to ron for his calipers

next DIY day will probably be 8th or 15th april.. i'll be installing my sparco bucket seat.. so you guys can start planning too if you wana do something..

i think the prelude caliper spraying is quite tiring if you follow my extremely anal methods of sanding and prep.. so if anyone wants to do it pls let me know in advance.. prob hold it on a separate day unless you wana come punctually at 12noon on DIY day (like ron and darren last time haha)

oh and my dad says no smoking! haha he says you can smoke at the gate not in the carpark healthly lifestyle la..

haha. bro, i confess to smoking some cigg that day at ur carpark. so sorry dude. btw 8-15 april my exam period so most likely can't join you guys. will only be available after 18 april.

bro, can pass me the contact of the bro who does the heatshield? or can diy i dun mind doing.

EK_Series wrote:haha. bro, i confess to smoking some cigg that day at ur carpark. so sorry dude. btw 8-15 april my exam period so most likely can't join you guys. will only be available after 18 april.

bro, can pass me the contact of the bro who does the heatshield? or can diy i dun mind doing.

haha no worries bro.. finish up your exams first

you can get it from this fella.. i found his yahooAuctions http://page.auctions.shopping.yahoo.com ... n/87979438 haha enterprising man.. haha

his number is 96710018.. he drives a white turbo forrester.. i get it from him in the shenton way area..

actually i see if i can steal some from somewhere ahaha if you got no time to buy.. if you got no time at all, juz get zippyalex to do for you.. he's damn good at this sorta thing and he'll teach you along the way