Singapore Honda Club

Bro weaver, u didnt sms me about the meet up.... Sadddd.

Oh by the way I went to Garage R to check out Apexi RSM (REV Speed Meter), and other accessories.

Pls Comment. I wish to install the Apexi RSM Black Edition, and maybe a NA Timer, is garage R good.

Maybe later, will change the front suspension also. but exhaust may not change.

yah more poisons needed.... think dec can find a few days to take a hike to GZ. :-) need to recover abit from a scam first before can spend more.

i very noob lah btw.. alot of things i also blur one (hence kenna scam).

like hid, buy tot original philips one, come out made in china crap type. sigh.

btw. i did an alignment the other day, kenny mentioned that our rear cambers all very jialat, got any kit available yet for them? I googled the Acura Tsx one apparently there's this SPC camber kit, does it work?

lingamair wrote:yah more poisons needed.... think dec can find a few days to take a hike to GZ. :-) need to recover abit from a scam first before can spend more.

i very noob lah btw.. alot of things i also blur one (hence kenna scam).

like hid, buy tot original philips one, come out made in china crap type. sigh.

btw. i did an alignment the other day, kenny mentioned that our rear cambers all very jialat, got any kit available yet for them? I googled the Acura Tsx one apparently there's this SPC camber kit, does it work?

listen to kenny will not go wrong... he done alot for cl7... but i not sure cu same or not...
im on spc too... no pro...

if u scare kena scam u can look for our cl7 lobang king aka trident69... he can help u out...

enjoy ur mod!

cheers!

nice meeting up with all the Cl7 guys.. still gian the Cl7R

had a run in with a turbo charged black SBU plate civic EG just now.. all I can say is damn! lol.

lingamair wrote:cheers!

nice meeting up with all the Cl7 guys.. still gian the Cl7R

had a run in with a turbo charged black SBU plate civic EG just now.. all I can say is damn! lol.

cannot compare with turbo la... NA still a NA... somemore is EG le... power to weight ratio already lost liao...

Arbo u take your accord euro and turbocharge lor...

MrMurderman wrote:

lingamair wrote:cheers!

nice meeting up with all the Cl7 guys.. still gian the Cl7R

had a run in with a turbo charged black SBU plate civic EG just now.. all I can say is damn! lol.

cannot compare with turbo la... NA still a NA... somemore is EG le... power to weight ratio already lost liao...

Arbo u take your accord euro and turbocharge lor...

:-) wish i dare to zhng my car so much.

Anyway, there has been a fix released for the pinging issue. Here's the reply from Honda NZ folks.

"Thank you for your contact.

I understand the issue you have asked about.
There is an issue with some 2009 Model Accords making engine noise when accelerating. Honda N.Z has a software upgrade , a knock sensor part change and a series of required adjustments.

Honda N.Z will not be able to facilitate this upgrade for you while your vehicle is in Singapore. I think the best advice for you is to contact your nearest Honda dealer in Singapore and explain your concern to them
They will need to obtain the required information and parts from Honda Motor Japan and carry out the required adjustments for you.

It is a specialized process to upgrade your vehicles software , only an authorised Honda dealer would be able to perform this process."

The next question is... how do we get this fix over here? I've asked Vincar to see if they can help, maybe we need to go to KM to fix?

lingamair wrote:

MrMurderman wrote:

lingamair wrote:cheers!

nice meeting up with all the Cl7 guys.. still gian the Cl7R

had a run in with a turbo charged black SBU plate civic EG just now.. all I can say is damn! lol.

cannot compare with turbo la... NA still a NA... somemore is EG le... power to weight ratio already lost liao...

Arbo u take your accord euro and turbocharge lor...

:-) wish i dare to zhng my car so much.

Anyway, there has been a fix released for the pinging issue. Here's the reply from Honda NZ folks.

"Thank you for your contact.

I understand the issue you have asked about.
There is an issue with some 2009 Model Accords making engine noise when accelerating. Honda N.Z has a software upgrade , a knock sensor part change and a series of required adjustments.

Honda N.Z will not be able to facilitate this upgrade for you while your vehicle is in Singapore. I think the best advice for you is to contact your nearest Honda dealer in Singapore and explain your concern to them
They will need to obtain the required information and parts from Honda Motor Japan and carry out the required adjustments for you.

It is a specialized process to upgrade your vehicles software , only an authorised Honda dealer would be able to perform this process."

The next question is... how do we get this fix over here? I've asked Vincar to see if they can help, maybe we need to go to KM to fix?

that the problem of getting a PI car... but no choice KM doesnt bring this model

kizzte wrote:Bro weaver, u didnt sms me about the meet up.... Sadddd.

Oh by the way I went to Garage R to check out Apexi RSM (REV Speed Meter), and other accessories.

Pls Comment. I wish to install the Apexi RSM Black Edition, and maybe a NA Timer, is garage R good.

Maybe later, will change the front suspension also. but exhaust may not change.

Sori bro kizzte, I had then just returned from overseas trip and very tie up with work. I did ask bro James to contact CUs and I thot he got yr contact. My apology, next meeting kopi on me...

In fact I went to the meet up very late at close to 11pm straight after work. Lucky everyone still there TCSS.

No worries, CL7 organise kopi very often...a nice group to mingle....look out for the 6th Oct trip...organised by Vice President Trident69!!!

cheers!

MrMurderman wrote:

lingamair wrote:

MrMurderman wrote: cannot compare with turbo la... NA still a NA... somemore is EG le... power to weight ratio already lost liao...

Arbo u take your accord euro and turbocharge lor...

:-) wish i dare to zhng my car so much.

Anyway, there has been a fix released for the pinging issue. Here's the reply from Honda NZ folks.

"Thank you for your contact.

I understand the issue you have asked about.
There is an issue with some 2009 Model Accords making engine noise when accelerating. Honda N.Z has a software upgrade , a knock sensor part change and a series of required adjustments.

Honda N.Z will not be able to facilitate this upgrade for you while your vehicle is in Singapore. I think the best advice for you is to contact your nearest Honda dealer in Singapore and explain your concern to them
They will need to obtain the required information and parts from Honda Motor Japan and carry out the required adjustments for you.

It is a specialized process to upgrade your vehicles software , only an authorised Honda dealer would be able to perform this process."

The next question is... how do we get this fix over here? I've asked Vincar to see if they can help, maybe we need to go to KM to fix?

that the problem of getting a PI car... but no choice KM doesnt bring this model

I really doubt KM will entertain u......the only way is to talk to Vincar, Vincent. Get bro James to help....he knows Vincar boss personally...may be k do something over a fraction of cost!! haha...good luck bros!

If its possible can you PM me your contact so in future i can contact you guys for any meetup...

James_Low wrote:If its possible can you PM me your contact so in future i can contact you guys for any meetup...

bro all our contact here... for CL7 bros...
http://www.shc-forum.com/viewtopic.php? ... &start=135

bro andy, I think bro james is refering to CU lah....dont worry everyone know yrs...

I sighted a white CU like bro James this morning along AYE towards Jurong...nice ride with nice rims...traffic was very slow...if the owner is here, thumbs up for yr ride and yr number...E XXXX. very unique number...

cheers!

weaver87 wrote:bro andy, I think bro james is refering to CU lah....dont worry everyone know yrs...

I sighted a white CU like bro James this morning along AYE towards Jurong...nice ride with nice rims...traffic was very slow...if the owner is here, thumbs up for yr ride and yr number...E XXXX. very unique number...

cheers!

i shy la

HI to all bros, today just went to Garage R to service my car. cost $165.

and I order a Apexi Rev meter with speed cut. however they will need more time to test out the speed cut on the new CU2. so mine will be the first test.

and heard from the adviser that hks is coming out with a new item to further improve the cu2.

and there is also a turbo may be suitable to fix in CU2.

and heard that theres a CU2 bro went down to check out some kit.

kizzte wrote:HI to all bros, today just went to Garage R to service my car. cost $165.

and I order a Apexi Rev meter with speed cut. however they will need more time to test out the speed cut on the new CU2. so mine will be the first test.

and heard from the adviser that hks is coming out with a new item to further improve the cu2.

and there is also a turbo may be suitable to fix in CU2.

and heard that theres a CU2 bro went down to check out some kit.

Do they have the CU2 mugen suspension for sale? Thinking of getting the suspension.