Unanswered topicsActive topics

Honda Stream A-pillars with 3-way Premium Speakers

For selling of any personal new / used car related or non automotive stuff here
Powerjaz
Posts: 1
Joined: Sun Apr 30, 2017

Honda Stream A-pillars with 3-way Premium Speakers

Postby Powerjaz » Wed Apr 10, 2019 8:33 pm

Selling a set of Audiofrog GS series 3-way speakers with customized Honda Stream A-pillars. Please check out my item in carousell by clicking the below link.

https://sg.carousell.com/p/203201662

Audiofrog offers a 1″ fabric dome tweeter (GS10) for smooth highs and it matches well with your choice of a 4″ (GS40) or a 6″ (GS60) premium midrange with propylene cone and a non-resonant ABS/Fiberglass basket. They feature a custom-designed and tuned passive crossover available for each mid/tweet combo to ensure a smooth transition between speakers. You can even use all three by using the 6″ driver (GS60) as a midbass with an active crossover and dedicated amplifier. The GS60 is optimized for use in passive systems with the GS10 tweeter. It can also be used in active systems or in a three-way system with the GS10 and GS40. For a combination of active and passive three-way system, use the GS60 with the GS10, GS40 and GS410C.

GS10 1″ (25MM) PREMIUM TWEETER

FEATURES
1″ (25 mm) fabric dome

1″ (25 mm) voice coil on aluminum former
Ferrofluid-filled gap for superior heat dissipation and increased damping at resonance

Neodymium motor with copper pole piece cap

Bucking magnet for increased sensitivity

Reflection-absorbing and diffusing foam pad under diaphragm for smooth frequency response

Screw terminals

GS40 4″ (100MM) PREMIUM MIDRANGE SPEAKER

FEATURES
Proprietary injection molded mented ABS and fiberglass basket

1″ (25mm) copper voice coil on Kapton® former

Ferrite motor with neodymium bucking magnet for increased sensitivity

Parabolic propylene cone

Nitrile butadiene rubber surround

Flat progressive Nomex® spider

Fast-on terminals secured with integrated PC board

Grilles included


GS60 6″ (165MM) PREMIUM MIDBASS SPEAKER
FEATURES

Proprietary injection molded vented ABS and fiberglass basket

1″ (25mm) copper voice coil on Kapton® former

Ferrite motor with extended polepiece for magnetic field symmetry

Parabolic propylene cone

Flat progressive Nomex® spider

Nitrile butadiene rubber surround

Fast-on terminals secured with integrated PC board

Grilles and multiadaptor included

GS410C PREMIUM GRADE PASSIVE CROSSOVER NETWORK

Specifications
Nominal Impedance: 4 Ω
RMS Power Handling: 70 W (system)
Peak Power Handling: 200 W (system)
Frequency Response: 90 Hz – 20 kHz (system)
Crossover Frequency: 4.2 kHz
Low Pass Filter: 3rd Order Acoustic
High Pass Filter: 3rd Order Acoustic
Recommended Amplifier RMS Power Range: 15 W – 75 W

Return to “Want To Sell Section”

Who is online

Users browsing this forum: No registered users and 0 guests