Unanswered topics Active topics

K&N Filter

Post Reply
Ah feng
3000rpm
3000rpm
Posts: 51
Joined: Tue Dec 15, 2009 3:17 am

K&N Filter

Post by Ah feng » Thu Jan 28, 2010 9:01 pm

Anyone know where to get K&N drop in filter?

Thanks.

User avatar
saint jo
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4044
Joined: Mon Sep 10, 2007 2:22 pm
Location: Turbo

Post by saint jo » Fri Jan 29, 2010 8:45 pm

speedworks
67437288
$95
Turbo...
sTocK iS beST....


世界上ä¸

Ah feng
3000rpm
3000rpm
Posts: 51
Joined: Tue Dec 15, 2009 3:17 am

Post by Ah feng » Tue Feb 02, 2010 3:14 am

Thanks EK4_JO

User avatar
saint jo
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4044
Joined: Mon Sep 10, 2007 2:22 pm
Location: Turbo

Post by saint jo » Wed Feb 03, 2010 5:38 pm

no problems... :wink:
Turbo...
sTocK iS beST....


世界上ä¸

Ah feng
3000rpm
3000rpm
Posts: 51
Joined: Tue Dec 15, 2009 3:17 am

Post by Ah feng » Thu Feb 04, 2010 3:15 am

EK4_JO wrote:no problems... :wink:

Bro, for drop in filter. Which brand would you recommend? :shock:

User avatar
saint jo
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4044
Joined: Mon Sep 10, 2007 2:22 pm
Location: Turbo

Post by saint jo » Tue Feb 09, 2010 4:03 pm

Ah feng wrote:
EK4_JO wrote:no problems... :wink:

Bro, for drop in filter. Which brand would you recommend? :shock:
KNN is good enough... if not biltz or mugen.. (both are more ex then KNN)
Turbo...
sTocK iS beST....


世界上ä¸

Ah feng
3000rpm
3000rpm
Posts: 51
Joined: Tue Dec 15, 2009 3:17 am

Post by Ah feng » Fri Feb 12, 2010 1:49 am

EK4_JO wrote:
Ah feng wrote:
EK4_JO wrote:no problems... :wink:

Bro, for drop in filter. Which brand would you recommend? :shock:
KNN is good enough... if not biltz or mugen.. (both are more ex then KNN)

I have friend who recommend open pod with custom made box up. So i am thinking whether to go for original drop in or open pod with customised box. Which are you using now?

User avatar
saint jo
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4044
Joined: Mon Sep 10, 2007 2:22 pm
Location: Turbo

Post by saint jo » Fri Feb 12, 2010 8:48 am

Ah feng wrote:
EK4_JO wrote:
Ah feng wrote:
Bro, for drop in filter. Which brand would you recommend? :shock:
KNN is good enough... if not biltz or mugen.. (both are more ex then KNN)

I have friend who recommend open pod with custom made box up. So i am thinking whether to go for original drop in or open pod with customised box. Which are you using now?
i'm on stock airbox :lol: depends on wat's ur budget...go for choon custom fat tummy la..not bad...
Turbo...
sTocK iS beST....


世界上ä¸

neonleon
5000rpm
5000rpm
Posts: 310
Joined: Fri Feb 15, 2008 5:55 pm

Post by neonleon » Tue Aug 19, 2014 1:58 pm

Do not use knn filter.
My car R18 engine just died after using a drop in for one month.
It was not the oil used by knn as proven by knn.
The actual cause was due to the small particles that knn filter allows through that clogged up the MAF sensor..
Unable to start the engine after the car just died.
Cranking is good so battery n starter are ok. Fuel pressure is there too.

As the filter was the new thing used, So opened up the filterbox n found the upper box has a layer of fine dust inside. Did a quick blow on the MAF n reinstall. Was able to get the engine to run for a second or 2.
Next changed out the knn filter to my old airfilter, cleaned the inside of upper box and did a thorough blow clean of the MAF sensor with my mouth. Reinstall back.
And i was able to start the engine again.
So beware.

Post Reply