Unanswered topics Active topics

Accord stuff for sale!

Home Of The Accordians
User avatar
trickster
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 1122
Joined: Tue May 23, 2006 3:42 pm
Location: Anywhere in Sg n JB

D2 coil over for CL7

Post by trickster » Sat Apr 20, 2013 8:01 pm

Selling the above in good condition as in no leak. Used for 2 years.

Note that the front left side adjustable damper jammed. Cannot click softer or harder but it is in a state of about 26 clicks out of 32. Nothing too hard nor soft.

Selling the above for $400 nego.
Interested party kindly SMS me at 8189 9943. Tks for viewing!!!
Image

lonerCL7a
5000rpm
5000rpm
Posts: 190
Joined: Thu Jun 28, 2012 10:24 am

Wts CL7 Stuffs

Post by lonerCL7a » Mon Apr 22, 2013 2:30 pm

Wanting to let go the following. C&C and non neg

1. Spoon Engine Damper- $120
2. Js Racing Test Pipe (Sprayed to matte black to avoid eyes of LTA)- $150

Please PM me to deal and low ballers please keep clear of the above posting. Thanks for viewing.

Cheers!
With good knowledge of theory is fine, but put it in practical. Cos with good theory and no practical experience, all theory is bull shit!

Slowbie
1000rpm
1000rpm
Posts: 17
Joined: Fri Apr 09, 2010 10:48 pm

Post by Slowbie » Mon Apr 22, 2013 8:43 pm

helping a fren to sell K20A6 engine and gearbox....CL7A engine with a mileage of 120km only...very healthy engine ...letting go $2500 with ECU harness ....

have a few items to let go also...

A pair of CL7A black leather seats w railsand red sticthings. $200

CL7A FL steering wheel with air bag...$200

interested pls pm me thanks...

tingfeng99
4000rpm
4000rpm
Posts: 93
Joined: Thu Jun 21, 2012 12:24 am

STOCK Header

Post by tingfeng99 » Fri Apr 26, 2013 11:08 am

Dear all,

Selling the below mentioned:

1) Original CL7 stock Header - $600

all price negotiable !!!

just quote me your best price sms or whatapps at 9616 7702

Ah Feng
Last edited by tingfeng99 on Mon May 27, 2013 12:36 pm, edited 1 time in total.

lonerCL7a
5000rpm
5000rpm
Posts: 190
Joined: Thu Jun 28, 2012 10:24 am

Looking for...

Post by lonerCL7a » Fri Apr 26, 2013 11:54 pm

Am looking for the following stuffs for CL7R:

1. UR anti roll bar (any other brands can also consider)
2. UR fender brace (any other brands can also consider)

Please PM me if anyone is letting go the above mention item. TIA. :)
With good knowledge of theory is fine, but put it in practical. Cos with good theory and no practical experience, all theory is bull shit!

jer123
2000rpm
2000rpm
Posts: 27
Joined: Wed Jan 02, 2013 11:01 pm

CL7a - J's Racing titanium exhaust with cert for sale

Post by jer123 » Sat Apr 27, 2013 2:10 am

Selling the above mention for $500 (Require swap with original). Labour on dutch.

Contact no. 91811043

User avatar
civic_aprilia
5000rpm
5000rpm
Posts: 206
Joined: Sun Feb 13, 2005 10:30 pm
Location: singapore

Wtb FinalDrive 5.1 or 5.4

Post by civic_aprilia » Sat Apr 27, 2013 5:17 pm

Looking for above""" SMS 96239536
Image

User avatar
viper76
8000rpm Red Line
8000rpm Red Line
Posts: 1870
Joined: Tue Mar 18, 2008 12:25 am
Location: East sider
Contact:

Dekitting sales....R n A bros

Post by viper76 » Sun May 05, 2013 7:34 pm

Hi bros ...helping a fren to dekit his stuffs as car going to be exported..
some items need to be swap and certain items no need swap...here are the list


1) Blitz oil temp n oil press meters with sensors $ 300

Image


2) original S2000 start button -----$100

Image


interested parties pls sms/whatapps me at 98802404 .....dun pm me thks..mailbox full
Last edited by viper76 on Thu Jun 20, 2013 2:36 am, edited 6 times in total.

gti_dragster
3000rpm
3000rpm
Posts: 65
Joined: Thu Aug 31, 2006 1:51 pm

looking for fujitsubo Exos

Post by gti_dragster » Fri May 10, 2013 11:30 am

Still looking for Fuji cash and carry
Call to deal


97806806
Chris

dazr4el
4000rpm
4000rpm
Posts: 107
Joined: Wed Sep 07, 2011 12:27 am

Bridgestone Potenza S001 for sale

Post by dazr4el » Fri May 10, 2013 1:16 pm

Hi,

Help a friend to sell a pair of used Bridgestone Potenza S001 tyre (x02), 225/45/17. One tyre pierced by a small nail before but already fixed.

Used less then 5km, condition 9/10.
Price: $180 C&C

Whatsapp me if interested @ 96885487

Thanks
CL7R.
J's Racing / HKS / Mugen / Skunk2

User avatar
viper76
8000rpm Red Line
8000rpm Red Line
Posts: 1870
Joined: Tue Mar 18, 2008 12:25 am
Location: East sider
Contact:

WTS brand new AP 4 n 6 pot BBK for civic,accord,edix,dc5

Post by viper76 » Fri May 10, 2013 9:14 pm

hi guys wanan sell brand new AP 4 n 6 pot bbk suitable for civic , accord , edix , stream and dc5 .

Brand new AP 4 pot( CP5200) with 330mm rotor , brake pads , ssbh selling $2.7k with installation..... $2.6k cash n carry .

Brand new AP 6 pot (CP9040) with 355mm rotor , brake pads , ssbh selling $3.2k with installation ...$3.1k cash n carry .

The AP calipers are original ,,,,rotors frm taiwan ....

CP9040

Image
Image


CP5200

Image
Image


intersted can sms /whatapps me at 98802404 ....

Teow Yiwei
4000rpm
4000rpm
Posts: 114
Joined: Sun Aug 02, 2009 11:41 am

WTS: Belt tensioner for $100

Post by Teow Yiwei » Sat May 11, 2013 4:11 pm

Want to sell belt tensioner for K20A for $100.
Ordered extra from Thian Seng but never fix. TS selling $107 including gst.
SMS 93629219.

XLR8
5000rpm
5000rpm
Posts: 307
Joined: Tue Feb 06, 2007 11:38 pm
Location: ECP

Euro R Dekit

Post by XLR8 » Fri May 17, 2013 5:02 pm

Air-Con/alternator belt - $60 (brand new from Thien Seng at $65 with receipt)
Stock HID bulb for foglights - $50
Stock clutch pad (very new) - Any offer
Apexi Open Pod - Offer
Last edited by XLR8 on Fri Jun 14, 2013 12:14 am, edited 3 times in total.

mikka08
2000rpm
2000rpm
Posts: 25
Joined: Tue Oct 12, 2004 1:09 am

Post by mikka08 » Sun May 26, 2013 10:53 am

wts: Accord Euro R stock exhaust. Good condition 8/10.
Looking for quick sale interested just pm your offer and you might get it.

:)

tingfeng99
4000rpm
4000rpm
Posts: 93
Joined: Thu Jun 21, 2012 12:24 am

Selling dekitted K series items

Post by tingfeng99 » Sun May 26, 2013 2:36 pm

3) Customized Cold Air Intake with fulling piping and filter. $140 CNC
Last edited by tingfeng99 on Mon Sep 30, 2013 1:12 am, edited 2 times in total.

Post Reply