solution for vibration during acceleration. settled.
-
- 4000rpm
- Posts: 145
- Joined: Wed May 13, 2009 6:57 pm
solution for vibration during acceleration. settled.
original honda inner axle joint and boot kit. cant solve your vibration during acceleration? heres the solution. during full throttle or 50% throttle my car will vibrate now problem solved. ordered extra set from states. one set front left and right. can fix at ah heng. +6597837908
Last edited by civic_1986 on Sat Jan 26, 2013 8:44 am, edited 2 times in total.
Re: solution for vibration during acceleration.
civic_1986 wrote:original honda inner axle joint and boot kit. cant solve your vibration during acceleration? heres the solution. during full throttle or 50% throttle my car will vibrate now problem solved. ordered extra set from states. one set front left and right. 500. can fix at ah heng. 96150265.
sorry bro, i don understand that .
Cause my car start to vibra once start engine .
Re: solution for vibration during acceleration.
try changing all ur 4 engine mounts first and see if the problem persists...jef9677 wrote:civic_1986 wrote:original honda inner axle joint and boot kit. cant solve your vibration during acceleration? heres the solution. during full throttle or 50% throttle my car will vibrate now problem solved. ordered extra set from states. one set front left and right. 500. can fix at ah heng. 96150265.
sorry bro, i don understand that .
Cause my car start to vibra once start engine .
-
- 4000rpm
- Posts: 145
- Joined: Wed May 13, 2009 6:57 pm
upz
idling vibrations most likely mountings. u can try changing the left side when we are standing infront looking at engine. mine is cruising between 80 and above wack or 50% throttle center console vibrate until like earth quake. yes bro its above 80 sure kena. look for skm ah heng for diagnosis den commit on my item. cheers.
i can feel my wheel wobble when i pick up from standstill. from 1st to third gear will wobble a lot. once i shift into 4th gear the wobble subside. anyone knows the problem ?
Electricity is actually made up of extremely tiny particles called electrons, that you cannot see with the naked eye unless you have been drinking...
Re: solution for vibration during acceleration.
Bro, I thought there were 6 engine mounts? Beware, there are Thailand made and Japan made ones.huffie wrote:try changing all ur 4 engine mounts first and see if the problem persists...jef9677 wrote:civic_1986 wrote:original honda inner axle joint and boot kit. cant solve your vibration during acceleration? heres the solution. during full throttle or 50% throttle my car will vibrate now problem solved. ordered extra set from states. one set front left and right. 500. can fix at ah heng. 96150265.
sorry bro, i don understand that .
Cause my car start to vibra once start engine .
Bro, when did you last change your drive shaft? FYI, recon ones doesn't solve the problem. I had both my drive shafts changed. Also, how about your wheel hub bearings? Changed?coldspark wrote:i can feel my wheel wobble when i pick up from standstill. from 1st to third gear will wobble a lot. once i shift into 4th gear the wobble subside. anyone knows the problem ?
Years or mileage doesn't really gauge the wear sometimes. If you always drive on bad roads (pit holes, bumpy roads etc), the wear is accelerated.
Re: solution for vibration during acceleration.
err.. where did you get the info of 6 mountings? 1 is the front, 1 is on the right near the water pump, 1 is at the rear of the front and one is on the left near the air-filter.. or is it 6 mountings for R as I'm not sure about Rs. I just get from MinGhee.. they provide what.. I buy what...puffer71 wrote:
Bro, I thought there were 6 engine mounts? Beware, there are Thailand made and Japan made ones.
Re: solution for vibration during acceleration.
Bro, there are 6 engine mounts for CL7R. Please read this. http://www.shc-forum.com/viewtopic.php? ... b221a5dbd6huffie wrote:err.. where did you get the info of 6 mountings? 1 is the front, 1 is on the right near the water pump, 1 is at the rear of the front and one is on the left near the air-filter.. or is it 6 mountings for R as I'm not sure about Rs. I just get from MinGhee.. they provide what.. I buy what...puffer71 wrote:
Bro, I thought there were 6 engine mounts? Beware, there are Thailand made and Japan made ones.
I should have the parts manual drawing somewhere in my emails from Driven Asia Joel.
My car mileage now is 210k, i changed all 4 pcs of wheel hub bearings at 175k, when the hub bearings is gone, normally can hear the woon-woon sound when driving, but this doesnt happen on my car. my drive shaft not changed yet as i cannot pin point drive shaft as the problempuffer71 wrote:Bro, when did you last change your drive shaft? FYI, recon ones doesn't solve the problem. I had both my drive shafts changed. Also, how about your wheel hub bearings? Changed?coldspark wrote:i can feel my wheel wobble when i pick up from standstill. from 1st to third gear will wobble a lot. once i shift into 4th gear the wobble subside. anyone knows the problem ?
Years or mileage doesn't really gauge the wear sometimes. If you always drive on bad roads (pit holes, bumpy roads etc), the wear is accelerated.
Electricity is actually made up of extremely tiny particles called electrons, that you cannot see with the naked eye unless you have been drinking...
Could it be uneven wear on your tyres...i had this before if i recall when i use 2 uneven wear tyres in the front...coldspark wrote:My car mileage now is 210k, i changed all 4 pcs of wheel hub bearings at 175k, when the hub bearings is gone, normally can hear the woon-woon sound when driving, but this doesnt happen on my car. my drive shaft not changed yet as i cannot pin point drive shaft as the problempuffer71 wrote:Bro, when did you last change your drive shaft? FYI, recon ones doesn't solve the problem. I had both my drive shafts changed. Also, how about your wheel hub bearings? Changed?coldspark wrote:i can feel my wheel wobble when i pick up from standstill. from 1st to third gear will wobble a lot. once i shift into 4th gear the wobble subside. anyone knows the problem ?
Years or mileage doesn't really gauge the wear sometimes. If you always drive on bad roads (pit holes, bumpy roads etc), the wear is accelerated.
btw 210k....power...
my usual mechanic also suspect uneven wear on my front tyre. 210k.. haha, i think i am the highest mileage in SHC. Anyone more than me?scratchyz wrote:Could it be uneven wear on your tyres...i had this before if i recall when i use 2 uneven wear tyres in the front...coldspark wrote:My car mileage now is 210k, i changed all 4 pcs of wheel hub bearings at 175k, when the hub bearings is gone, normally can hear the woon-woon sound when driving, but this doesnt happen on my car. my drive shaft not changed yet as i cannot pin point drive shaft as the problempuffer71 wrote: Bro, when did you last change your drive shaft? FYI, recon ones doesn't solve the problem. I had both my drive shafts changed. Also, how about your wheel hub bearings? Changed?
Years or mileage doesn't really gauge the wear sometimes. If you always drive on bad roads (pit holes, bumpy roads etc), the wear is accelerated.
btw 210k....power...
Electricity is actually made up of extremely tiny particles called electrons, that you cannot see with the naked eye unless you have been drinking...