Need technical advice ?
-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Thu Mar 04, 2010 1:57 am
how often do we need to change engine mounting? any good workshop to recommend and whats the damage like? thank you in advance!
-
Mugen Boi
- 7000rpm VTEC ON

- Posts: 1218
- Joined: Mon Apr 26, 2004 9:08 pm
- Location: Lor Ah Soo, Potong Pasir, Bishan, Leng Kee, Hillview
-
Contact:
Post
by Mugen Boi » Thu Mar 04, 2010 9:55 pm
u dun change engine mountings often...u only change it when it's spoilt

-
daboy14
- 4000rpm

- Posts: 128
- Joined: Mon Jan 18, 2010 1:45 am
- Location: Singapore
-
Contact:
Post
by daboy14 » Fri Mar 05, 2010 12:32 am
you dont change/replace it unless its damaged/spoilt..
diiffrent brands out there it depends on ur application wether
race track or daily use..
"LIFE begins at 8.9k rpm.... VTEC power!!!
-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Mon Mar 08, 2010 4:08 am
thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
-
eeee78
- SHC Die Hard!!!

- Posts: 32773
- Joined: Thu Nov 11, 2004 10:47 am
- Location: Fortune Island
Post
by eeee78 » Mon Mar 08, 2010 10:07 pm
charles wrote:thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
Vibration can be feel when engine is idling
TCSS Emperor!
讲鸟è¯
-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Mon Mar 08, 2010 11:10 pm
Should be normal vibrations . Not very extreme. Then wat could be the problem be?
-
redeye
- 5000rpm

- Posts: 160
- Joined: Sat Aug 02, 2008 3:35 pm
Post
by redeye » Thu Mar 11, 2010 7:10 pm
What car are you driving if it an EG ,EK
it vibrate because it an old car dont sweat too much over it

-
ivant9029
- 10 000rpm Over Rev

- Posts: 7308
- Joined: Sat May 03, 2008 9:45 pm
- Location: YISHUN
Post
by ivant9029 » Thu Mar 11, 2010 9:49 pm
charles wrote:thank you for the reply, here comes another question....how do u know it's spoilt? after change what will improve? knocking sound when moving off from standstill?
Send to the workshop...

-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Fri Mar 12, 2010 1:49 pm
thank you for the replies. I'm driving an ES(2004), any good workshop to recommend?
-
Gresini
- 8000rpm Red Line

- Posts: 1673
- Joined: Sun Aug 13, 2006 11:13 am
- Location: Geylang
-
Contact:
Post
by Gresini » Sat Apr 17, 2010 9:26 am
2004 car eng mounting spoil???
-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Sat Apr 17, 2010 9:54 am
Mounting no issue, lower arm bushing worn out
-
benade74
- 3000rpm

- Posts: 77
- Joined: Sat Sep 17, 2005 1:29 pm
Post
by benade74 » Sat May 01, 2010 11:13 pm
charles wrote:Mounting no issue, lower arm bushing worn out
I also drive 2004 ES5.. just change all my mounting at Autosaver Toh Guan..
-
charles
- 4000rpm

- Posts: 124
- Joined: Sun Jul 04, 2004 7:36 pm
- Location: singapore
Post
by charles » Fri May 07, 2010 2:57 am
Whats the damage like? thanks!
-
Gresini
- 8000rpm Red Line

- Posts: 1673
- Joined: Sun Aug 13, 2006 11:13 am
- Location: Geylang
-
Contact:
Post
by Gresini » Wed Jun 02, 2010 12:23 pm
Wah... All so rich... Change mounting...
I planning to inject silicone into my mounting...
CHEAP cheap upgrade+replacement!!!

-
dragger
- 3000rpm

- Posts: 75
- Joined: Mon Sep 14, 2009 9:10 pm
- Location: CCK
Post
by dragger » Fri Jun 04, 2010 11:11 am
Hi,
Busted Engine mount can loose torque & power.
More vibrations when idle & even running.
You will know if its damage by looking on it, if its cracked or tear.
VTEC power!