Unanswered topics Active topics

tuning help

Need technical advice ?
Post Reply
88civic
4000rpm
4000rpm
Posts: 97
Joined: Tue Sep 29, 2009 12:12 am
Location: Jurong port

tuning help

Post by 88civic » Tue Sep 29, 2009 12:15 am

hi.. just wanting to check, which ecu can be used for turbo and vtec incase i decided to swap from na to turbo. tks

Katas
3000rpm
3000rpm
Posts: 46
Joined: Fri May 16, 2008 2:22 pm

Post by Katas » Tue Sep 29, 2009 11:34 am

s300

88civic
4000rpm
4000rpm
Posts: 97
Joined: Tue Sep 29, 2009 12:12 am
Location: Jurong port

Post by 88civic » Tue Sep 29, 2009 1:25 pm

thx but thats too exp. any other cheaper ecu?

DJBobble
5000rpm
5000rpm
Posts: 162
Joined: Wed Oct 08, 2008 10:10 pm

Post by DJBobble » Wed Sep 30, 2009 11:23 am

i would recommend that you save up a few months more to buy the expensive stuff than to kill off your project fast and end up in a mess (sometimes).
good things don't come cheap, cheap things are not usually good(although there are rare cases which I've come across people just using chipped p28 with vafc can do wonders too).

cheers

User avatar
Silver
9000rpm Rev Cut
9000rpm Rev Cut
Posts: 4788
Joined: Sun Feb 22, 2004 5:08 pm
Location: 10-pi-nee

Re: tuning help

Post by Silver » Wed Sep 30, 2009 11:36 am

88civic wrote:hi.. just wanting to check, which ecu can be used for turbo and vtec incase i decided to swap from na to turbo. tks
Unichip Q+.... :) :)
Image

There's always a better 2molo...........

88civic
4000rpm
4000rpm
Posts: 97
Joined: Tue Sep 29, 2009 12:12 am
Location: Jurong port

Post by 88civic » Wed Sep 30, 2009 12:27 pm

DJBobble wrote:i would recommend that you save up a few months more to buy the expensive stuff than to kill off your project fast and end up in a mess (sometimes).
good things don't come cheap, cheap things are not usually good(although there are rare cases which I've come across people just using chipped p28 with vafc can do wonders too).

cheers
thats a good advice. thanks :D

VTW
2000rpm
2000rpm
Posts: 23
Joined: Wed Apr 25, 2007 12:27 am
Contact:

Re: tuning help

Post by VTW » Tue Oct 13, 2009 12:27 am

88civic wrote:hi.. just wanting to check, which ecu can be used for turbo and vtec incase i decided to swap from na to turbo. tks
Unichip Q+ would be able to handle it if it is set up and tuned properly. There are several ways to set it up to run even close to standalone ecu.

Let me know if you are interested.

Cheers!

Post Reply