Wheel Alignment at amk industrial park >

thomas_77 · Post by **thomas_77** » Mon Apr 20, 2009 9:10 am

Hi All ,

I used to visit this place for wheel alignment after tyre change . Person is Kenny . Quite well known . Lost his contact and his office say he has started his own shop . Any one has this person no ??

Thanks in advance .

huatoh · Post by **huatoh** » Mon Apr 20, 2009 9:30 am

Kenny - 9092 1015. Still at AMK Autopoint 4th floor

thomas_77 · Post by **thomas_77** » Mon Apr 20, 2009 12:06 pm

Thanks .

Silver · Post by **Silver** » Mon Apr 20, 2009 12:28 pm

Kenny is a unit 04-15 if I am not wrong.. Just 2-3 shops away from his old place...

calvin_ · Post by **calvin_** » Mon Apr 20, 2009 7:39 pm

does he have the specs for CL7? i need to get my wheels aligned. i had to run my baby over poorly prepared roads no choice.

Silver · Post by **Silver** » Mon Apr 20, 2009 11:28 pm

calvin_ wrote:does he have the specs for CL7? i need to get my wheels aligned. i had to run my baby over poorly prepared roads no choice.

Should have.... He does lots of CL7R....

calvin_ · Post by **calvin_** » Tue Apr 21, 2009 7:28 pm

Silver wrote:
calvin_ wrote:does he have the specs for CL7? i need to get my wheels aligned. i had to run my baby over poorly prepared roads no choice.
Should have.... He does lots of CL7R....

and how much does it generally cost for wheel alignment?

xhareshx · Post by **xhareshx** » Tue Apr 21, 2009 9:43 pm

calvin_ wrote:
Silver wrote:
calvin_ wrote:does he have the specs for CL7? i need to get my wheels aligned. i had to run my baby over poorly prepared roads no choice.
Should have.... He does lots of CL7R....
and how much does it generally cost for wheel alignment?

i jus modified my rear camber and bought spc front camber bolts from him. he know our cl7 well. no worries. 90921015. $60 for alignment.

J.Light · Post by **J.Light** » Wed Apr 22, 2009 1:39 am

xhareshx wrote:
calvin_ wrote:
Silver wrote: Should have.... He does lots of CL7R....
and how much does it generally cost for wheel alignment?
i jus modified my rear camber and bought spc front camber bolts from him. he know our cl7 well. no worries. 90921015. $60 for alignment.

Did my alignment also...on Jan 09.
$60bucks too.
Know his thing about our CL7.

calvin_ · Post by **calvin_** » Wed Apr 22, 2009 11:34 pm

xhareshx wrote:
calvin_ wrote:
Silver wrote: Should have.... He does lots of CL7R....
and how much does it generally cost for wheel alignment?
i jus modified my rear camber and bought spc front camber bolts from him. he know our cl7 well. no worries. 90921015. $60 for alignment.

alright thank you. will contact him. but then one question, w/o camber kit how to adjust the camber if it is not aligned?

xhareshx · Post by **xhareshx** » Thu Apr 23, 2009 9:06 pm

calvin_ wrote:
xhareshx wrote:
calvin_ wrote:and how much does it generally cost for wheel alignment?
i jus modified my rear camber and bought spc front camber bolts from him. he know our cl7 well. no worries. 90921015. $60 for alignment.
alright thank you. will contact him. but then one question, w/o camber kit how to adjust the camber if it is not aligned?

cannot be aligned. if im not wrong.. once our car has been lowered, the camber will confirm go out of alignment..
after i lowered my camber was 3degree off.. so i got the camber kit..

if not too bad, can ignore it, if its balanced left and right and can thahan the tire wear

calvin_ · Post by **calvin_** » Fri Apr 24, 2009 10:28 pm

xhareshx wrote:
calvin_ wrote:
xhareshx wrote: i jus modified my rear camber and bought spc front camber bolts from him. he know our cl7 well. no worries. 90921015. $60 for alignment.
alright thank you. will contact him. but then one question, w/o camber kit how to adjust the camber if it is not aligned?
cannot be aligned. if im not wrong.. once our car has been lowered, the camber will confirm go out of alignment..
after i lowered my camber was 3degree off.. so i got the camber kit..

if not too bad, can ignore it, if its balanced left and right and can thahan the tire wear

so for the wheel alignment what can he adjust? anyways how much does the camber kit cost?