Tomei RS2 coilover-tok tok sound

slkt · Post by **slkt** » Sun Jun 20, 2010 10:30 pm

I've a related question which is the rear camber. After lowered the rear to 2 fingers, the camber is opened to 2deg. Is it a must to buy the SPC camber arm or kit to prevent uneven tyre wear? Or just rotate more often will do?

previa333 · Post by **previa333** » Sun Jun 20, 2010 11:17 pm

a muz to ve at e rear.....front no need thou

rjj · Post by **rjj** » Mon Jun 21, 2010 12:33 am

hving both front n rear will give you the edge to adjust for spiritual driving.

slkt · Post by **slkt** » Mon Jun 21, 2010 11:27 pm

Ok I was told the camber arm/kit cost 300++, is there anywhere I can get it cheaper?

rjj · Post by **rjj** » Tue Jun 22, 2010 11:28 am

give kenny at 9092-1015. he is known for this.

slkt · Post by **slkt** » Tue Jun 22, 2010 11:35 am

rjj wrote:give kenny at 9092-1015. he is known for this.

Ok thks bro.

absolute odc · Post by **absolute odc** » Sun Jul 04, 2010 9:47 pm

slkt wrote:
rjj wrote:give kenny at 9092-1015. he is known for this.
Ok thks bro.

I change my adjustable chamber kit at JB for Rm 500, so far so good. if u want the contacts, PM me. As for front, theres no need unless u r like me running at 19 inches n above..

ODC04 · Post by **ODC04** » Thu Jul 08, 2010 1:30 pm

bought and fixed at Yap for $280.....

slkt · Post by **slkt** » Mon Jul 12, 2010 8:01 pm

ODC04 wrote:bought and fixed at Yap for $280.....

When did u install? They dun have stock for the modded or SPC one.

ODC04 · Post by **ODC04** » Mon Jul 12, 2010 10:11 pm

Changed abt 6 mths ago.....
Had uneven wear rear tyre problem....

No regrets...

konz · Post by **konz** » Fri Aug 13, 2010 9:43 pm

slkt wrote:I just installed the coilover yesterday too, its harder than stock but firmer. Front 1.5 rear 2 fingers. Maybe 18/24 clicks is hard so will go back to change the settings. So far no irritating noises.

hi all,

seldom post on e forum but always enjoy e knowledge shared by e seniors and gurus.

finally got my suspension changed to rs2 after owning a rb1 for slightly over a year, n oso after reading lots of positive review on tis coilover...

a satisfied job n thanks to e yap bro's crew...

so far no "tok tok" sound for me...

do agreed that e ride is firmer, which is good and a far improvement as compared to stock...

however, do feel that e ride gets abit hard during uneven road when travelling 90km/hr above.

was told by yap's crews e damping setting is front 12 rear 16 and front/rear having 2 finger height. just wana check with e others who had oso used e same coilover wats their current setting and e ride's feel...

overall i am happy with tis mod...

rjj · Post by **rjj** » Fri Aug 13, 2010 11:49 pm

bro you just play with it by 2 click to try out which is the best for you.

for me front think is 20-22 rear 20. something like tat.

btw there is no best setting as different stroke for different folks

konz wrote:
slkt wrote:I just installed the coilover yesterday too, its harder than stock but firmer. Front 1.5 rear 2 fingers. Maybe 18/24 clicks is hard so will go back to change the settings. So far no irritating noises.
hi all,

seldom post on e forum but always enjoy e knowledge shared by e seniors and gurus.

finally got my suspension changed to rs2 after owning a rb1 for slightly over a year, n oso after reading lots of positive review on tis coilover...

a satisfied job n thanks to e yap bro's crew... so far no "tok tok" sound for me...

do agreed that e ride is firmer, which is good and a far improvement as compared to stock...

however, do feel that e ride gets abit hard during uneven road when travelling 90km/hr above.

was told by yap's crews e damping setting is front 12 rear 16 and front/rear having 2 finger height. just wana check with e others who had oso used e same coilover wats their current setting and e ride's feel...

overall i am happy with tis mod...

konz · Post by **konz** » Sun Aug 15, 2010 8:20 pm

hi bro rjj,

thanks for the prompt reply, n sorry for late replying...

okie, will try to play around with e click to test out e best setting...

meanwhile, any advise on how to access to e damper adjustment knob...??? cos first time in doing it...

sorry for e trouble n hope u dun mind...

thanks...

rjj wrote:bro you just play with it by 2 click to try out which is the best for you.

for me front think is 20-22 rear 20. something like tat.

btw there is no best setting as different stroke for different folks

konz wrote:
slkt wrote:I just installed the coilover yesterday too, its harder than stock but firmer. Front 1.5 rear 2 fingers. Maybe 18/24 clicks is hard so will go back to change the settings. So far no irritating noises.
hi all,

seldom post on e forum but always enjoy e knowledge shared by e seniors and gurus.

finally got my suspension changed to rs2 after owning a rb1 for slightly over a year, n oso after reading lots of positive review on tis coilover...

a satisfied job n thanks to e yap bro's crew... so far no "tok tok" sound for me...

do agreed that e ride is firmer, which is good and a far improvement as compared to stock...

however, do feel that e ride gets abit hard during uneven road when travelling 90km/hr above.

was told by yap's crews e damping setting is front 12 rear 16 and front/rear having 2 finger height. just wana check with e others who had oso used e same coilover wats their current setting and e ride's feel...

overall i am happy with tis mod...

SINGAPORE HONDA CLUB
Forum and Message Board for All Honda Lovers

Tomei RS2 coilover-tok tok sound

cheap

Re: cheap

Change