Autofoam anyone?
Autofoam anyone?
Anyone tried this before or heard of this product? Very very tempted to try this and hopefully it would further enhance the handling of the car. By the way stiff ring is good stuff for those who are not on it yet. It improves your cars' handling.
Here are the links for autofoam
http://www.youtube.com/watch?v=SZpQvxtqhAA part 1
http://www.youtube.com/watch?v=HRIAY2GDNoo part 2
http://www.youtube.com/watch?v=HRIAY2GDNoo part 3
https://www.facebook.com/pages/Autofoam/193456474019263
Might drive up to KL later part of the year to do this up. Hopefully can give my take on this product.
Here are the links for autofoam
http://www.youtube.com/watch?v=SZpQvxtqhAA part 1
http://www.youtube.com/watch?v=HRIAY2GDNoo part 2
http://www.youtube.com/watch?v=HRIAY2GDNoo part 3
https://www.facebook.com/pages/Autofoam/193456474019263
Might drive up to KL later part of the year to do this up. Hopefully can give my take on this product.
Relax. What is mind? No matter. What is matter? Never mind!
AutoFOAM starts from
1) Rm 980 for COMFORT package ( complete Undercarriage, Engine & Rear subframes).
Dramatic improvements to Ride Comfort, Handling & Hi Speed Noise.
2) AF ULTIMATE....2480.
2) AF TRACK package...3280.
Note : All packages can be done in STAGES and Upgradable.
Soundproofing solutions are custom tailored to suit your Expectations and Budget.
Starts from Rm 180 for 3M silicone door seals to 8K +++ for a FULL car Premium treatment with Roof, Doors, Hood & Boot, Firewall, entire Floor Pan, Trunk floor, wheel arches, Wheel Arc coating, Door seals.
Again, solutions can be done in Stages & Upgradable.
If you had modified your Exhausts and Sspecicifically want to reduce the Drone, bring it round for us to test.
Solutions can start from just 300 to 2K +.
See u soon to Transform your ride.
Cheers,
Desmond
KL AUTO
017 282 3073
http://autofoam.net/autofoam/autofoam-application/
1) Rm 980 for COMFORT package ( complete Undercarriage, Engine & Rear subframes).
Dramatic improvements to Ride Comfort, Handling & Hi Speed Noise.
2) AF ULTIMATE....2480.
2) AF TRACK package...3280.
Note : All packages can be done in STAGES and Upgradable.
Soundproofing solutions are custom tailored to suit your Expectations and Budget.
Starts from Rm 180 for 3M silicone door seals to 8K +++ for a FULL car Premium treatment with Roof, Doors, Hood & Boot, Firewall, entire Floor Pan, Trunk floor, wheel arches, Wheel Arc coating, Door seals.
Again, solutions can be done in Stages & Upgradable.
If you had modified your Exhausts and Sspecicifically want to reduce the Drone, bring it round for us to test.
Solutions can start from just 300 to 2K +.
See u soon to Transform your ride.
Cheers,
Desmond
KL AUTO
017 282 3073
http://autofoam.net/autofoam/autofoam-application/
Relax. What is mind? No matter. What is matter? Never mind!
so you goin ahead wid de mod?ZakkWylde wrote:AutoFOAM starts from
1) Rm 980 for COMFORT package ( complete Undercarriage, Engine & Rear subframes).
Dramatic improvements to Ride Comfort, Handling & Hi Speed Noise.
2) AF ULTIMATE....2480.
2) AF TRACK package...3280.
Note : All packages can be done in STAGES and Upgradable.
Soundproofing solutions are custom tailored to suit your Expectations and Budget.
Starts from Rm 180 for 3M silicone door seals to 8K +++ for a FULL car Premium treatment with Roof, Doors, Hood & Boot, Firewall, entire Floor Pan, Trunk floor, wheel arches, Wheel Arc coating, Door seals.
Again, solutions can be done in Stages & Upgradable.
If you had modified your Exhausts and Sspecicifically want to reduce the Drone, bring it round for us to test.
Solutions can start from just 300 to 2K +.
See u soon to Transform your ride.
Cheers,
Desmond
KL AUTO
017 282 3073
http://autofoam.net/autofoam/autofoam-application/
Learning is a journey. There's never an end to it.
Re: Autofoam anyone?
Bro, I've done it 3.5 years ago in KL. it's best to strip the car bare. Process takes one day but curing takes 3 days but the they will tell you it takes one day to cure.ZakkWylde wrote:Anyone tried this before or heard of this product? Very very tempted to try this and hopefully it would further enhance the handling of the car. By the way stiff ring is good stuff for those who are not on it yet. It improves your cars' handling.
Here are the links for autofoam
http://www.youtube.com/watch?v=SZpQvxtqhAA part 1
http://www.youtube.com/watch?v=HRIAY2GDNoo part 2
http://www.youtube.com/watch?v=HRIAY2GDNoo part 3
https://www.facebook.com/pages/Autofoam/193456474019263
Might drive up to KL later part of the year to do this up. Hopefully can give my take on this product.
Re: Autofoam anyone?
SInce you did it 3.5 years ago, wats your comment on the product? Any difference? During the curing period of 3 days u cannot drive the car?puffer71 wrote:Bro, I've done it 3.5 years ago in KL. it's best to strip the car bare. Process takes one day but curing takes 3 days but the they will tell you it takes one day to cure.ZakkWylde wrote:Anyone tried this before or heard of this product? Very very tempted to try this and hopefully it would further enhance the handling of the car. By the way stiff ring is good stuff for those who are not on it yet. It improves your cars' handling.
Here are the links for autofoam
http://www.youtube.com/watch?v=SZpQvxtqhAA part 1
http://www.youtube.com/watch?v=HRIAY2GDNoo part 2
http://www.youtube.com/watch?v=HRIAY2GDNoo part 3
https://www.facebook.com/pages/Autofoam/193456474019263
Might drive up to KL later part of the year to do this up. Hopefully can give my take on this product.
Relax. What is mind? No matter. What is matter? Never mind!
- Waterbottle
- 6000rpm VTEC ON
- Posts: 484
- Joined: Tue Nov 14, 2006 9:28 am
I've seen this type of foam while during ns as I was the building ic.KNNB wrote:If got damaged or dented in an accident, can repair?
That's my only concern for this autofoam. Once done, it's irreversible.
The aircon piping got leak and the repair guy will insert a tip into the aircon pipe n discharge the liquid foam. Once injected n contacted air, it becomes foam.
think the main con is if kena langa, these foam will be everywhere... A mess.
Now the problem is whether the workshop will charge u eextra to clean away the foam so as to do welding & spray painting.
I'm back with a vengenance....
I think you should watch the 3rd part youtube link attached to know how the foam works. It solidifies to become rock hard and will not contain water in case water vapour form up.Waterbottle wrote:I've seen this type of foam while during ns as I was the building ic.KNNB wrote:If got damaged or dented in an accident, can repair?
That's my only concern for this autofoam. Once done, it's irreversible.
The aircon piping got leak and the repair guy will insert a tip into the aircon pipe n discharge the liquid foam. Once injected n contacted air, it becomes foam.
think the main con is if kena langa, these foam will be everywhere... A mess.
Now the problem is whether the workshop will charge u eextra to clean away the foam so as to do welding & spray painting.
Last edited by ZakkWylde on Tue Jul 02, 2013 11:29 am, edited 1 time in total.
Relax. What is mind? No matter. What is matter? Never mind!
- Waterbottle
- 6000rpm VTEC ON
- Posts: 484
- Joined: Tue Nov 14, 2006 9:28 am
what im trying to say is there are welding joints at the internal of the car. These rock hard foam will fill up the internal, maybe covering the welding points. In the event u need to weld or knock back the car body, most probably the rock hard foam u need to remove first, n I guess it will be very hard to remove. Unless the foam makes the car body invincible n doesn't dent when langa.ZakkWylde wrote:I think you should watch the 3rd part youtube link attached to know how the foam works. It solidifies to become rock hard and will not contain water in case water vapour form up.Waterbottle wrote:I've seen this type of foam while during ns as I was the building ic.KNNB wrote:If got damaged or dented in an accident, can repair?
That's my only concern for this autofoam. Once done, it's irreversible.
The aircon piping got leak and the repair guy will insert a tip into the aircon pipe n discharge the liquid foam. Once injected n contacted air, it becomes foam.
think the main con is if kena langa, these foam will be everywhere... A mess.
Now the problem is whether the workshop will charge u eextra to clean away the foam so as to do welding & spray painting.
I'm back with a vengenance....