Need technical advice ?
-
nickfury
- 2000rpm
- Posts: 21
- Joined: Mon Oct 24, 2011 11:32 pm
Post
by nickfury » Sat Apr 14, 2012 7:34 pm
as above , any bros can advise normally where are the strut bars
placed ? front in the bonnet i know one pc , under carraige how many pcs ?
thanks for advise !
-
AlanZ
- 7000rpm VTEC ON
- Posts: 1150
- Joined: Mon Feb 25, 2008 3:24 pm
Post
by AlanZ » Sun Apr 15, 2012 5:40 pm
There are many types..
E.g Front tower bar, front anti roll, rear anti roll, lower 2 point, lower 4 point, rear tower etc..
-
nickfury
- 2000rpm
- Posts: 21
- Joined: Mon Oct 24, 2011 11:32 pm
Post
by nickfury » Sun Apr 15, 2012 8:39 pm
AlanZ wrote:There are many types..
E.g Front tower bar, front anti roll, rear anti roll, lower 2 point, lower 4 point, rear tower etc..
thx for yr reply ... may if advisable to put strut bar for all u just mentioned ? and will it cost alot ??
-
Seitou
- 4000rpm
- Posts: 96
- Joined: Sat Jan 07, 2012 8:22 pm
- Location: West Side
Post
by Seitou » Mon Apr 16, 2012 1:28 am
Depending on the brands you getting.
But more cheaper brands will be like ultra racing , submit.
As for ultra racing if you get it in JB will be much more cheaper then singapore.
Front anti roll costing around 480rm same as rear anti roll.
Front Struct should be somewhere around 120rm.
-
leocruz
- Posts: 1
- Joined: Tue May 01, 2012 6:03 pm
-
Contact:
Post
by leocruz » Tue May 01, 2012 6:05 pm
There are many types. Strut bars, known as strut braces, are really nice suspension accessories for automobiles. Quality strut bars we provide for you stabilize your car .
-
AlanZ
- 7000rpm VTEC ON
- Posts: 1150
- Joined: Mon Feb 25, 2008 3:24 pm
Post
by AlanZ » Wed May 02, 2012 11:13 pm
nickfury wrote:AlanZ wrote:There are many types..
E.g Front tower bar, front anti roll, rear anti roll, lower 2 point, lower 4 point, rear tower etc..
thx for yr reply ... may if advisable to put strut bar for all u just mentioned ? and will it cost alot ??
It depends how u wan ur ride to behave and flex.. Doesnt mean all bars means best.
-
funkychicken
- 5000rpm
- Posts: 186
- Joined: Thu Dec 10, 2009 3:39 am
Post
by funkychicken » Tue Jun 12, 2012 8:18 am
Front top strut bar, front anti roll bar, rear anti roll
Bar and boot bar more then sufficcient. But using coilover and lower ride , need to use roll centre adjuster to compensate the angle of ur suspension. Camber nut too is a major improvement on roll.
-
ahdwin
- 4000rpm
- Posts: 83
- Joined: Thu Nov 11, 2010 8:04 pm
Post
by ahdwin » Tue Aug 14, 2012 2:59 pm
any workshops to recommend in JB for ultra racing struts? convenient and cheap.
-
funkychicken
- 5000rpm
- Posts: 186
- Joined: Thu Dec 10, 2009 3:39 am
Post
by funkychicken » Tue Sep 11, 2012 6:22 pm
Compensate angle when u lower ur car using coilover u need roll centre adjuster.
Strut bars UR has lotsa fake ones at jb. Juz beware, the joint weld not good finishing.