Unanswered topics Active topics

Anyone Is Planning For A Trip To WS in JB Soon?

Civic model year 1980 - 2000
User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Anyone Is Planning For A Trip To WS in JB Soon?

Post by yeobt » Sat Apr 14, 2012 12:12 pm

i think i need to service my EK soon.
anyone interested to tag along maybe on 18 April (weekday)?

also, i can hear a fair bit of sound generating from the front wheel,
suspecting is drive shaft or wheel bearing, any idea?
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
Will_SG
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 831
Joined: Sun Jun 13, 2010 11:28 am
Location: SGP North
Contact:

Re: Anyone Is Planning For A Trip To WS in JB Soon?

Post by Will_SG » Sat Apr 14, 2012 10:16 pm

yeobt wrote:i think i need to service my EK soon.
anyone interested to tag along maybe on 18 April (weekday)?

also, i can hear a fair bit of sound generating from the front wheel,
suspecting is drive shaft or wheel bearing, any idea?
sound when turning only or when moving straight.

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Re: Anyone Is Planning For A Trip To WS in JB Soon?

Post by yeobt » Sun Apr 15, 2012 10:55 am

Will_SG wrote:
yeobt wrote:i think i need to service my EK soon.
anyone interested to tag along maybe on 18 April (weekday)?

also, i can hear a fair bit of sound generating from the front wheel,
suspecting is drive shaft or wheel bearing, any idea?
sound when turning only or when moving straight.
No kok kok sound when Turning. But is generating Wong Wong sound while
moving especially at higher speed. Like driving buses. :P
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
Will_SG
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 831
Joined: Sun Jun 13, 2010 11:28 am
Location: SGP North
Contact:

Re: Anyone Is Planning For A Trip To WS in JB Soon?

Post by Will_SG » Sun Apr 15, 2012 1:36 pm

yeobt wrote:
Will_SG wrote:
yeobt wrote:i think i need to service my EK soon.
anyone interested to tag along maybe on 18 April (weekday)?

also, i can hear a fair bit of sound generating from the front wheel,
suspecting is drive shaft or wheel bearing, any idea?
sound when turning only or when moving straight.
No kok kok sound when Turning. But is generating Wong Wong sound while
moving especially at higher speed. Like driving buses. :P
wong wong sound = high chance bearing issue

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Re: Anyone Is Planning For A Trip To WS in JB Soon?

Post by yeobt » Sun Apr 15, 2012 1:50 pm

Will_SG wrote:
wong wong sound = high chance bearing issue
how much it costs to replace in ringgit? :P
few more things to do at the same time.
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
ah_rek
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 546
Joined: Tue Nov 17, 2009 12:47 am
Location: Jurong

Post by ah_rek » Sun Apr 15, 2012 4:21 pm

what spec of your gearbox you change ?

if it happens after you change your gb, and it gets louder when you accelerate, then it's cfm your gb liao.
Image

slow is gold.

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Post by yeobt » Sun Apr 15, 2012 9:31 pm

ah_rek wrote:what spec of your gearbox you change ?

if it happens after you change your gb, and it gets louder when you accelerate, then it's cfm your gb liao.
the mech didnt reveal the exact spec, only says is stage one close ratio.

no, i think it happens after i drove my left wheel into a CB pot hole inside a CP. :twisted:
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
flava
4000rpm
4000rpm
Posts: 155
Joined: Wed Jul 11, 2007 9:41 pm

Post by flava » Mon Apr 16, 2012 2:29 pm

yeobt wrote:
ah_rek wrote:what spec of your gearbox you change ?

if it happens after you change your gb, and it gets louder when you accelerate, then it's cfm your gb liao.
the mech didnt reveal the exact spec, only says is stage one close ratio.

no, i think it happens after i drove my left wheel into a CB pot hole inside a CP. :twisted:
on the topic of gb, i intending to do an upgrade on my b-series, however worried abt cruising speed... can i know after u upgrade, whats your 5th gear rpm @ 100km/h?
"hi bro, your items can cheaper bro??"

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Post by yeobt » Mon Apr 16, 2012 3:49 pm

flava wrote:
yeobt wrote:
ah_rek wrote:what spec of your gearbox you change ?

if it happens after you change your gb, and it gets louder when you accelerate, then it's cfm your gb liao.
the mech didnt reveal the exact spec, only says is stage one close ratio.

no, i think it happens after i drove my left wheel into a CB pot hole inside a CP. :twisted:
on the topic of gb, i intending to do an upgrade on my b-series, however worried abt cruising speed... can i know after u upgrade, whats your 5th gear rpm @ 100km/h?
2500 @ 100km/h
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
kozmix
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 733
Joined: Tue Mar 21, 2006 10:11 pm

Post by kozmix » Mon Apr 16, 2012 4:37 pm

yeobt wrote:
flava wrote:
yeobt wrote: the mech didnt reveal the exact spec, only says is stage one close ratio.

no, i think it happens after i drove my left wheel into a CB pot hole inside a CP. :twisted:
on the topic of gb, i intending to do an upgrade on my b-series, however worried abt cruising speed... can i know after u upgrade, whats your 5th gear rpm @ 100km/h?
2500 @ 100km/h
wtf , 2500 @ 100km/h, worse than ESI stock gearing.
your mech actually tell u is close ratio gearbox ?
pls share the workshop name so all bro here can avoid.
You know you're so JDM when your black underwear have red stitchings.
Image

User avatar
ah_rek
6000rpm VTEC ON
6000rpm VTEC ON
Posts: 546
Joined: Tue Nov 17, 2009 12:47 am
Location: Jurong

Post by ah_rek » Mon Apr 16, 2012 4:56 pm

Image

I warned u, do ur homework before changing anything stupid which leads to double the price to get what u actually need. Either buy genuine parts or know what u are getting. In this case u learned the hard way like all of us.

There is no stage 1 close ratio, no close ratio @2.5k rpm cause It serves no purpose!

*ps pls publish the workshop who recommend the stage 1 close ratio, guess the future newbie can also avoid.
Image

slow is gold.

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Post by yeobt » Mon Apr 16, 2012 5:56 pm

You guys know la, I'm new on this GB thing so what should be the correct rpm?
Also, at this 2500@100, what does it tells? Not even close ratio?

But the setup is good enough for street use, better then before n the FC is not affected.
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

User avatar
flava
4000rpm
4000rpm
Posts: 155
Joined: Wed Jul 11, 2007 9:41 pm

Post by flava » Mon Apr 16, 2012 6:27 pm

yeobt wrote:You guys know la, I'm new on this GB thing so what should be the correct rpm?
Also, at this 2500@100, what does it tells? Not even close ratio?

But the setup is good enough for street use, better then before n the FC is not affected.
im puzzled, a stock EK3 gb at 100kmh, rpm at 5th gear will be 2.8k, given that ive driven it before.

2.5k rpm cruising is much lower than stock already so where's the close ratio in that? perhaps you should check out the history of your box and its gears, cos it really seems that your build is taking a step backwards.

anyway, if you can feel the difference and more enjoyable, who's to criticize? just that the figures dont add up.

to give you a better gauge on close ratio, im on an EK9 gearbox, 4.4FD. this already gives me 3.4k rpm @ 100kmh. and its stock!
"hi bro, your items can cheaper bro??"

User avatar
Will_SG
7000rpm VTEC ON
7000rpm VTEC ON
Posts: 831
Joined: Sun Jun 13, 2010 11:28 am
Location: SGP North
Contact:

Post by Will_SG » Mon Apr 16, 2012 7:42 pm

flava wrote:
yeobt wrote:You guys know la, I'm new on this GB thing so what should be the correct rpm?
Also, at this 2500@100, what does it tells? Not even close ratio?

But the setup is good enough for street use, better then before n the FC is not affected.
im puzzled, a stock EK3 gb at 100kmh, rpm at 5th gear will be 2.8k, given that ive driven it before.

2.5k rpm cruising is much lower than stock already so where's the close ratio in that? perhaps you should check out the history of your box and its gears, cos it really seems that your build is taking a step backwards.

anyway, if you can feel the difference and more enjoyable, who's to criticize? just that the figures dont add up.

to give you a better gauge on close ratio, im on an EK9 gearbox, 4.4FD. this already gives me 3.4k rpm @ 100kmh. and its stock!
Maybe his RPM gauge is inaccurate. Yeobt what was your rpm at 100km/h before u change the GB?

User avatar
yeobt
5000rpm
5000rpm
Posts: 314
Joined: Sun Sep 07, 2008 3:32 pm

Post by yeobt » Mon Apr 16, 2012 7:50 pm

Will_SG wrote:
Maybe his RPM gauge is inaccurate. Yeobt what was your rpm at 100km/h before u change the GB?
2k @100 before GB changed.

I'm on my way home, will try to push my civic @100 to see the effect. :P
After Spending So Much Time And Money To Own A Car,
You Must Learn To Enjoy The Fun Of Driving It,
Not Stressing Yourself On Your Journey Home.


Image

Post Reply