Major Dekit for CL7a with parts for R and K series

[Jfam]

Hi All, have the parts below for sales, most parts require swop unless otherwise stated;

Handling-
Cusco front 2 point strut bar - $120 labour by buyer (no swop required)
Team Kunimitsu boot brace - $200 labour by buyer (no swop required) - reserved Darren
Comptech rear anti roll bar -$150 labour by buyer (swop required) - reserved nick
BC BR coilovers (1 year+ old) - $600 labour by buyer (swop required)
Original TSX big 4 Brembo brakes. Direct bolt on to FD, stream and CL7 - $1200 (no swop required)
Dixcel slotted front rotor 300mm - $180 labour by buyer (no swop required)

Carbon fibre parts-
Non-scoop carbon bonnet - $400 labour by buyer (swop required)
Carbon rear boot - $350 labour by buyer (no swop required)
Carbon Fibre spark plug cover - $70 labour by buyer (no swop required) can use for all K engines - reserved Kevin

Exhaust system-
Fujitsubo Racing exhaust (with cert) - $550labour by buyer (swop required)

Interior/electronics-
Original JDM head unit with customize OBD reader/ display (only 1 in Singpore) - $350 labour by buyer (no swop required)
Original JDM dash panel with clock and Headunit display (only 1 in Singpapore) - $180 labour by buyer (no swop required)
2 x original Recaro SR3 - $700 labour by buyer (swop required)
2 x factory seat bracket - $150 labour by buyer (swop required)
Euro-R interior panel - $80 labour by buyer (swop required) - reserved viper
Euro-R steering wheel $200 labour by buyer (no swop required)
Euro-R gear boot - $60 labour by buyer (no swop required)
Honda K100 w/DC5R Ecu (harness included) - $900 labour by buyer (Will only sell if type-R head is sold)

Engine-
K&N typhoon full ram air intake filter - $300 labour by buyer (swop required)
K&N weather cover for open air filter - $80 labour by buyer (no swop required)
Euro-R throttle body - $150 labour by buyer (swop required)
Rbb intake manifold - $250 labour by buyer (no swop required) - reserved Sam
Euro-R type-R head with civic type-R cam - $1500 labour by buyer (no swop required)
Hayden automatic transmission cooler - $75 labour by buyer (no swop required)

Spare parts-
Stock boot plus boot lip - $150 labour by buyer (no swop required)
Stock steering wheel - $120 labour by buyer (no swop required)
Stock intake manifold - $200 labour by buyer (no swop required)
Red engine valve cover - $150 labour by buyer (no swop required)

Please contact me at 97475071, price slightly nego. Can discuss further if prefer to buy the whole car. Thank you!

[Jfam]

Hi all, just added in this item!

Original TSX big 4 Brembo brakes. Direct bolt on to FD, stream and CL7 - $1000 (swop required)
Import from US and condition is 9/10!!

[Jfam]

HI All,

Status updated with new item;
Dixiel slotted front rotor 300mm without swop.


Thank you!

[Jfam]

HI All,

Some parts not selling.
Will be dekitting in SKM 23rd to 27th.

Car will be handed over by end of November.

Thank you!

[Jfam]

Mugen grille sold.

5 more days and car will be handed over. Thanks!

[wankie]

dixcel rotors still available?

[angrysongg]

Please message me at 83991158! Interested in your exo


Sent from my iPhone using Tapatalk